適用于 UEFI 的 Intel® 伺服器主機板 S2600WF 系列 BIOS 和固件更新套件

版本: 02.01.0013 (最新的) 日期: 2021/2/24

可用下載

S2600WFR_EFI_BIOSR02010013_ME04.01.04.423_BMC_2.48.ce3e3bd2_FRUSDR_2.01_DCPMM01.02.00.5444.zip

不受限於作業系統

英文

32.26 MB

578847ec9e331e25974a4c53a03adace

下載

其他版本

詳細說明:

注意:

如果系統是適用于 Nutanix* Enterprise Cloud 的 Intel® Data Center Block,則請勿使用此軟體更新套件 (SUP),該系統會仰賴 Nutanix 的的 4000000004400000000400000( 的 2018 年 12 月 15 日更新)。有關詳細資訊,請前往 Nutanix* Life Cycle Manager 頁面。有關硬體和固件相容性的清單,請流覽 Nutanix* 硬體與固件相容性頁面

要求
執行新的 BIOS 和固件更新時,需要最新版本的 BIOS 和固件。如果您嘗試直接從舊版 BIOS 升級到 新版本,但不符合固件需求,升級可能會失敗。在您執行新的 BIOS 和固件更新之前,請先驗證服務器系統上目前的 BIOS 和固件版本。若要將系統固件堆疊更新為此更新套件中包含的 版本,系統 上目前載入的系統固件堆疊 必須符合下列條件

  • 系統 BIOS - R02.01.0012
  • ME Firmware - 04.01.04.381
  • BMC Firmware - 2.48.89b32e0d
  • FRUSDR - 2.00

如果系統目前不符合 BIOS 和固件需求,您必須從本網頁的其他版本清單中下載先前已張貼的系統更新套件 (SUP),並更新系統至前述的固件版本,再將系統更新至包含下載的固件更新套件的固件堆疊。若無法到達所需的固件堆疊,可能會導致預期外的結果。 

概述

此下載記錄包含適用于 Intel® 伺服器主機板 S2600WF 系列和適當的 Intel® 伺服器系統 R1000WF 系列與 Intel® 伺服器系統 R2000WF 家族的 BIOS 和固件更新套件,以用於 Intel 的技術嵌入式整合可延伸韌體介面 (UEFI) Shell。

目的

此固件更新套件支援第 1 代® Xeon® 處理器產品

此更新套件包括以下生產等級的系統固件更新,包括 Intel® Optane™ DC 持續性記憶體的 FW 01.02.00.5395。如果您收到不同 FW 的 Intel® Optane™ DC 持續性記憶體 DIMM,請依以下一般安裝程式安裝:

  • 系統 BIOS - 02.01.0013
  • ME Firmware - 04.01.04.423
  • BMC Firmware - 2.48.ce3e3bd2
    • 閱讀 TA-1161, 瞭解此 BMC 版本的密碼複雜度規則實施
  • FRUSDR - 2.01
  • Intel® Optane™ DC 持續性記憶體固件 (DCPMM) - 01.02.00.5444

重要注意事項:

從 BMC 2.22.59c3b83a 開始,當 BMC EWS 上的 KCS 政策控制模式配置為「拒絕所有」時,BMC 和 FRUSDR 無法升級/降級為預期行為。仍可透過 Redfish 或 BMC EWS 執行更新

此 SUP 套件包含適用于 Intel® Optane™ DC 持續性記憶體 (DCPMM) 的 FW 01.02.00.5417,如果您收到不同 FW 的 DCPMM DIMM,請在以下一般安裝程式後安裝此一個。

由於 BMC 固件 1.90 停用 Cipher Suite 3,且預設僅保持 Cipher Suite 17 開啟,使用 ipm cipolol 存取 BMC LAN 時,「-C 17」是必填的。)

Cipher Suite 17 于 2016 年 10 月 8 日首次在 ipmcipol 1.8.18 中推出,您必須將 ipmcipol 更新至此版本或更新的版本,因為早期版本的 ipmol 沒有 Cipher 17 支援。

ipm囙ol 在高負載網路中運作時運作不順利。我們建議使用「-N 5」來增加額外的超時。RMCP+ 預設為 1 秒,這是不夠的。–N 5 將設定 5 秒為超時。

因此,命令如下所示:
ipm的ol –I lanplus –H ip –U 使用者 –P 密碼 –C 17 –N 5 指令
如需詳細資訊,請參閱包含的「TA-1143_Extra_parameters_needed_for_ipmitool.pdf」。

由於安全性修訂變更,不支援降級 BMC 1.43.660a4315。

一般安裝程式

  1. 解壓縮更新套件的內容,並複製所有檔案到移動媒體 (USB 快閃磁片磁碟機) 的根目錄。
  2. 將 USB 快閃磁碟機插入要更新的系統上任何可用的 USB 埠。
  3. 啟動伺服器電源並載入 UEFI shell。
  4. 執行 啟動.nsh 開始更新程式。
  5. 更新程式成功後,請重新開機系統。
  6. 如果安裝了 Intel® Optane™ DC 持續性記憶體,則第二次重新開機後,請執行啟動.nsh 第二次®以升級 Intel® Optane™ DC 持續性記憶體固件。

查看固件更新和疑難排解提示

其他注意事項

  • 在啟動固件 更新之前,先參閱版本說明與 述檔並更新說明檔案,以進一步說明安裝說明、支援的硬體、新的程式、錯誤修正和已知問題。
  • 按一下連結Readme (PDF) 以下載簡體中文的 BIOS 更新指示。
  • 此套件包含 BIOS 復原檔案。請參閱此套件中的 BIOS 版本說明中的 BIOS 復原指示。
  • 若要解決 P2A ASPEED 驅動程式問題,請參閱下列 P1 作業系統安裝指南:
    • RHEL73_InstallationGuide_Rev1.00
    • SLES12_InstallationGuide_Rev1.00
    • WinSrv16_InstallationGuide_Rev1.00

 

 

此資訊結合人工翻譯和電腦翻譯原始的內容,方便您使用。此內容僅提供一般資訊,請勿將其視為完整或精確而仰賴之。

下載說明文件

此下載檔案適用於下列產品。

Intel 軟體授權合約

X

本份軟體授權合約條款係規範您使用軟體的情形,適用於您下載的任何軟體。

INTEL SOFTWARE LICENSE AGREEMENT

IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING.

Do not use or load this software and any associated materials (collectively,

the "Software") until you have carefully read the following terms and

conditions. By loading or using the Software, you agree to the terms of this

Agreement. If you do not wish to so agree, do not install or use the Software.

LICENSES: Please Note:

- If you are a network administrator, the "Site License" below shall

apply to you.

- If you are an end user, the "Single User License" shall apply to you.

- If you are an original equipment manufacturer (OEM), the "OEM License"

shall apply to you.

SITE LICENSE. You may copy the Software onto your organization's computers

for your organization's use, and you may make a reasonable number of

back-up copies of the Software, subject to these conditions:

1. This Software is licensed for use only in conjunction with Intel

component products. Use of the Software in conjunction with non-Intel

component products is not licensed hereunder.

2. You may not copy, modify, rent, sell, distribute or transfer any part

of the Software except as provided in this Agreement, and you agree to

prevent unauthorized copying of the Software.

3. You may not reverse engineer, decompile, or disassemble the Software.

4. You may not sublicense or permit simultaneous use of the Software by

more than one user.

5. The Software may include portions offered on terms in addition to those

set out here, as set out in a license accompanying those portions.

SINGLE USER LICENSE. You may copy the Software onto a single computer for

your personal, noncommercial use, and you may make one back-up copy of the

Software, subject to these conditions:

1. This Software is licensed for use only in conjunction with Intel

component products. Use of the Software in conjunction with non-Intel

component products is not licensed hereunder.

2. You may not copy, modify, rent, sell, distribute or transfer any part

of the Software except as provided in this Agreement, and you agree to

prevent unauthorized copying of the Software.

3. You may not reverse engineer, decompile, or disassemble the Software.

4. You may not sublicense or permit simultaneous use of the Software by

more than one user.

5. The Software may include portions offered on terms in addition to those

set out here, as set out in a license accompanying those portions.

OEM LICENSE: You may reproduce and distribute the Software only as an

integral part of or incorporated in Your product or as a standalone

Software maintenance update for existing end users of Your products,

excluding any other standalone products, subject to these conditions:

1. This Software is licensed for use only in conjunction with Intel

component products. Use of the Software in conjunction with non-Intel

component products is not licensed hereunder.

2. You may not copy, modify, rent, sell, distribute or transfer any part

of the Software except as provided in this Agreement, and you agree to

prevent unauthorized copying of the Software.

3. You may not reverse engineer, decompile, or disassemble the Software.

4. You may only distribute the Software to your customers pursuant to a

written license agreement. Such license agreement may be a "break-the-

seal" license agreement. At a minimum such license shall safeguard

Intel's ownership rights to the Software.

5. The Software may include portions offered on terms in addition to those

set out here, as set out in a license accompanying those portions.

NO OTHER RIGHTS. No rights or licenses are granted by Intel to You, expressly

or by implication, with respect to any proprietary information or patent,

copyright, mask work, trademark, trade secret, or other intellectual property

right owned or controlled by Intel, except as expressly provided in this

Agreement.

OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Software

remains with Intel or its suppliers. The Software is copyrighted and

protected by the laws of the United States and other countries, and

international treaty provisions. You may not remove any copyright notices

from the Software. Intel may make changes to the Software, or to items

referenced therein, at any time without notice, but is not obligated to

support or update the Software. Except as otherwise expressly provided, Intel

grants no express or implied right under Intel patents, copyrights,

trademarks, or other intellectual property rights. You may transfer the

Software only if the recipient agrees to be fully bound by these terms and if

you retain no copies of the Software.

LIMITED MEDIA WARRANTY. If the Software has been delivered by Intel on

physical media, Intel warrants the media to be free from material physical

defects for a period of ninety days after delivery by Intel. If such a defect

is found, return the media to Intel for replacement or alternate delivery of

the Software as Intel may select.

EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE, THE SOFTWARE IS

PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED WARRANTY OF ANY KIND

INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, OR FITNESS FOR A

PARTICULAR PURPOSE. Intel does not warrant or assume responsibility for the

accuracy or completeness of any information, text, graphics, links or other

items contained within the Software.

LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS SUPPLIERS BE LIABLE

FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, LOST PROFITS,

BUSINESS INTERRUPTION, OR LOST INFORMATION) ARISING OUT OF THE USE OF OR

INABILITY TO USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT EXCLUSION OR

LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES OR CONSEQUENTIAL OR INCIDENTAL

DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE

OTHER LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION.

TERMINATION OF THIS AGREEMENT. Intel may terminate this Agreement at any time

if you violate its terms. Upon termination, you will immediately destroy the

Software or return all copies of the Software to Intel.

APPLICABLE LAWS. Claims arising under this Agreement shall be governed by the

laws of California, excluding its principles of conflict of laws and the

United Nations Convention on Contracts for the Sale of Goods. You may not

export the Software in violation of applicable export laws and regulations.

Intel is not obligated under any other agreements unless they are in writing

and signed by an authorized representative of Intel.

GOVERNMENT RESTRICTED RIGHTS. The Software is provided with "RESTRICTED

RIGHTS." Use, duplication, or disclosure by the Government is subject to

restrictions as set forth in FAR52.227-14 and DFAR252.227-7013 et seq. or its

successor. Use of the Software by the Government constitutes acknowledgment

of Intel's proprietary rights therein. Contractor or Manufacturer is Intel

2200 Mission College Blvd., Santa Clara, CA 95052.

我接受這份授權合約

我不接受這份授權合約

提供意見回饋

我們的目標是要讓「下載中心」成為對您有價值的資源。請在這裡提交您的意見、問題或建議。

需要 Intel® 產品方面的協助嗎?聯絡支援

您是否覺得此網站上的資訊實用?

您的個人資訊將僅用於回覆此詢問。您的名字和電子郵件地址不會加入到任何郵件清單,並且除非有所要求,您也不會從 Intel Corporation 收到電子郵件。按下「送出」確認您接受 Intel 使用條款並且瞭解 Intel 隱私權政策。