Intel® 伺服器主機板 S7200AP適用于 UEFI 的產品系列固件更新包*

版本: R01.03.0021 (最新的) 日期: 2018/12/3

可用下載

S7200AP_APR_UEFI_SUP_BIOSR01030021_ME030103030_BMC0115r11288_FRUSDR130.zip

不受限於作業系統

英文

46.85 MB

c70393b89e4b63700d0e62d003ff0ca6

下載

其他版本

詳細說明:

uEFI 系統更新包 (SUP) 安裝和操作

指示

Intel 強烈建議在執行系統更新之前閱讀本文檔的全部內容。驗證系統是否滿足記錄的要求將確保成功更新,並在更新完成後提供最可靠的系統功能。

發佈于 - 2018年12月3日

********************************************************************************
此更新包包括以下生產級系統軟體
更新:

系統 BIOS - R01.03.0021
ME 固件 - 03.01.03.030.0
BMC 固件 - 01.15.11288
FRUSDR - 1.30


--- 支援的產品---

英特爾® 伺服器主機板 S7200AP 和 S7200APR 產品系列

聯繫Intel 瞭解生產硬體支援 要求

重要說明:
- 在安裝之前,請閱讀 BIOS 發行筆記.txt 文檔,並密切關注此特定版本的重要注意事項和已知問題。

- 此統一固件包支援 S7200AP 和 S7200APR 板和計算模組產品。還支援所有關聯的Intel® 至強 Phi™ x200(以前是 KNL)或 X205(以前 NM)CPU。

- 此套裝軟體中提供的所有更新僅使用嵌入式 uEFI 操作環境安裝。

- 不要修改任何指令檔。編寫的腳本將提供最可靠的更新體驗。

- 如果出於任何原因,在執行初始更新後需要重新安裝系統 BIOS、BMC 固件或 FRU 和 SDR 資料,則套裝軟體會
包括可單獨運行的獨立指令檔。這些檔包括:啟動。NSH,上升BIOS.NSH,上升ME.NSH,上升FD.NSH,上升BMC.NSH,和上升FRUSDR.NSH。

注意:請勿使用個人。NSH 更新檔,直到系統最初使用啟動更新系統。NSH 檔。

注:使用 BMC 更新 BMC 固件時。NSH 更新指令檔,此版本中的 BMC 快閃記憶體和 BIOS USB 驅動程式之間存在交互
這可能導致隨機字元(通常是字母"e")在 BMC 更新完成後出現在命令列中。BMC 快閃記憶體後重新開機
將清除此錯誤。

*****************************************************************
系統軟體 要求
*****************************************************************
S7200AP 產品系列
- S7200AP 基板 PBA 以 -304 及更高結尾。
-Intel® 至強Phi™x200(以前的KNL)的生產版本,高達230W TDP。
- 系統 BIOS- R01.02.0001 或更高
- BMC 固件 - 版本 01.00.10304 或更高版本

S7200APR 產品系列
- S7200APR 基板 PBA 以 -250 及更高結束。
- 生產版Intel® 至強 Phi™ x200(以前是 KNL)和Intel® 至強 Phi™ x205( 以前 KNM) 處理器,高達 320W TDP。
- 系統 BIOS- R01.03.0001 或更高
- BMC 固件 - 版本 01.09.10985 或更高版本


- 前面板、熱插拔背板和底板 FRU 資料必須可用,才能成功進行主機殼自動檢測。
*****************************************************************
更新過程
*****************************************************************

- 解壓縮更新包的內容,並將所有檔案複製到 USB 快閃磁碟機上的根目錄
- 將 USB 快閃磁碟機插入伺服器系統上要更新的任何可用 USB 埠。
- 打開伺服器電源
- 系統將自動訪問 uEFI 外殼並開始更新過程。

- 如果檔案複製到根目錄以外的資料夾,則將伺服器引導到 uEFI 外殼。這可以通過開機自檢期間的 BIOS 設置實用程式訪問,或通過開機自檢期間訪問的 啟動功能表訪問。
- 在 uEFI 外殼中運行命令"map-r"以安裝 USB 快閃磁碟機
- 運行命令"fs0:"將資料夾更改為 USB 快閃磁碟機。USB 快閃磁碟機也可能安裝到 fs1:具體取決於其他已安裝的設備。"fs_"的數量取決於命令"map-r"的結果
- 將資料夾更改為包含更新包檔的資料夾,並手動啟動"Startup.nsh"指令檔以開始載入所有更新。


- 更新過程成功完成後重新開機系統

諮詢說明:
每當系統 BIOS 更新時,都會安裝兩個 BIOS 映射,一個
映射和備份映射。備份映射在第一次系統重新開機期間載入
更新主 BIOS 映射後。在第一次系統重新開機期間,
螢幕將空白約 2 分鐘,而備份 BIOS 圖像
正在載入。在此期間,請勿關閉或重新開機系統。
當備份 BIOS 映射更新時,螢幕上將顯示一條消息
完成。

驗證更新:

- 在 POST 期間,在提示訪問 BIOS 設置實用程式時,點擊
- 從 BIOS 設置實用程式主功能表中,點擊 鍵載入 BIOS 預設值
- 在主功能表中驗證 BIOS 修訂是否正確
- 將游標移到伺服器管理功能表
- 將游標向下移動到系統資訊選項,然後點擊"輸入"
- 驗證 BMC 固件版本是否正確
- 驗證 SDR 修訂是否正確
- 驗證 ME 固件版本是否正確
- 配置所需的 BIOS 選項設置
- 點擊 F10 鍵以保存更改並退出


系統軟體 已完成。


警告: |
!!在更新過程中,請勿中斷或重新開機或從系統斷電。
這樣做可能會使系統無法運行。!!

!!載入到系統後,請勿嘗試向下 更新系統軟體。
這樣做可能會使系統無法運行。!!

 

 

此資訊結合人工翻譯和電腦翻譯原始的內容,方便您使用。此內容僅提供一般資訊,請勿將其視為完整或精確而仰賴之。

下載說明文件

此下載檔案適用於下列產品。

Intel 軟體授權合約

X

本份軟體授權合約條款係規範您使用軟體的情形,適用於您下載的任何軟體。

INTEL SOFTWARE LICENSE AGREEMENT

IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING.

Do not use or load this software and any associated materials (collectively,

the "Software") until you have carefully read the following terms and

conditions. By loading or using the Software, you agree to the terms of this

Agreement. If you do not wish to so agree, do not install or use the Software.

LICENSES: Please Note:

- If you are a network administrator, the "Site License" below shall

apply to you.

- If you are an end user, the "Single User License" shall apply to you.

- If you are an original equipment manufacturer (OEM), the "OEM License"

shall apply to you.

SITE LICENSE. You may copy the Software onto your organization's computers

for your organization's use, and you may make a reasonable number of

back-up copies of the Software, subject to these conditions:

1. This Software is licensed for use only in conjunction with Intel

component products. Use of the Software in conjunction with non-Intel

component products is not licensed hereunder.

2. You may not copy, modify, rent, sell, distribute or transfer any part

of the Software except as provided in this Agreement, and you agree to

prevent unauthorized copying of the Software.

3. You may not reverse engineer, decompile, or disassemble the Software.

4. You may not sublicense or permit simultaneous use of the Software by

more than one user.

5. The Software may include portions offered on terms in addition to those

set out here, as set out in a license accompanying those portions.

SINGLE USER LICENSE. You may copy the Software onto a single computer for

your personal, noncommercial use, and you may make one back-up copy of the

Software, subject to these conditions:

1. This Software is licensed for use only in conjunction with Intel

component products. Use of the Software in conjunction with non-Intel

component products is not licensed hereunder.

2. You may not copy, modify, rent, sell, distribute or transfer any part

of the Software except as provided in this Agreement, and you agree to

prevent unauthorized copying of the Software.

3. You may not reverse engineer, decompile, or disassemble the Software.

4. You may not sublicense or permit simultaneous use of the Software by

more than one user.

5. The Software may include portions offered on terms in addition to those

set out here, as set out in a license accompanying those portions.

OEM LICENSE: You may reproduce and distribute the Software only as an

integral part of or incorporated in Your product or as a standalone

Software maintenance update for existing end users of Your products,

excluding any other standalone products, subject to these conditions:

1. This Software is licensed for use only in conjunction with Intel

component products. Use of the Software in conjunction with non-Intel

component products is not licensed hereunder.

2. You may not copy, modify, rent, sell, distribute or transfer any part

of the Software except as provided in this Agreement, and you agree to

prevent unauthorized copying of the Software.

3. You may not reverse engineer, decompile, or disassemble the Software.

4. You may only distribute the Software to your customers pursuant to a

written license agreement. Such license agreement may be a "break-the-

seal" license agreement. At a minimum such license shall safeguard

Intel's ownership rights to the Software.

5. The Software may include portions offered on terms in addition to those

set out here, as set out in a license accompanying those portions.

NO OTHER RIGHTS. No rights or licenses are granted by Intel to You, expressly

or by implication, with respect to any proprietary information or patent,

copyright, mask work, trademark, trade secret, or other intellectual property

right owned or controlled by Intel, except as expressly provided in this

Agreement.

OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Software

remains with Intel or its suppliers. The Software is copyrighted and

protected by the laws of the United States and other countries, and

international treaty provisions. You may not remove any copyright notices

from the Software. Intel may make changes to the Software, or to items

referenced therein, at any time without notice, but is not obligated to

support or update the Software. Except as otherwise expressly provided, Intel

grants no express or implied right under Intel patents, copyrights,

trademarks, or other intellectual property rights. You may transfer the

Software only if the recipient agrees to be fully bound by these terms and if

you retain no copies of the Software.

LIMITED MEDIA WARRANTY. If the Software has been delivered by Intel on

physical media, Intel warrants the media to be free from material physical

defects for a period of ninety days after delivery by Intel. If such a defect

is found, return the media to Intel for replacement or alternate delivery of

the Software as Intel may select.

EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE, THE SOFTWARE IS

PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED WARRANTY OF ANY KIND

INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, OR FITNESS FOR A

PARTICULAR PURPOSE. Intel does not warrant or assume responsibility for the

accuracy or completeness of any information, text, graphics, links or other

items contained within the Software.

LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS SUPPLIERS BE LIABLE

FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, LOST PROFITS,

BUSINESS INTERRUPTION, OR LOST INFORMATION) ARISING OUT OF THE USE OF OR

INABILITY TO USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT EXCLUSION OR

LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES OR CONSEQUENTIAL OR INCIDENTAL

DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE

OTHER LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION.

TERMINATION OF THIS AGREEMENT. Intel may terminate this Agreement at any time

if you violate its terms. Upon termination, you will immediately destroy the

Software or return all copies of the Software to Intel.

APPLICABLE LAWS. Claims arising under this Agreement shall be governed by the

laws of California, excluding its principles of conflict of laws and the

United Nations Convention on Contracts for the Sale of Goods. You may not

export the Software in violation of applicable export laws and regulations.

Intel is not obligated under any other agreements unless they are in writing

and signed by an authorized representative of Intel.

GOVERNMENT RESTRICTED RIGHTS. The Software is provided with "RESTRICTED

RIGHTS." Use, duplication, or disclosure by the Government is subject to

restrictions as set forth in FAR52.227-14 and DFAR252.227-7013 et seq. or its

successor. Use of the Software by the Government constitutes acknowledgment

of Intel's proprietary rights therein. Contractor or Manufacturer is Intel

2200 Mission College Blvd., Santa Clara, CA 95052.

我接受這份授權合約

我不接受這份授權合約

支援產品焦點、焦點內容等

產品支援

支援產品焦點、焦點內容等

產品規格

產品規格

所有需要的資訊由您一指掌控

提供意見回饋

我們的目標是要讓「下載中心」成為對您有價值的資源。請在這裡提交您的意見、問題或建議。

需要 Intel® 產品方面的協助嗎?聯絡支援

您是否覺得此網站上的資訊實用?

您的個人資訊將僅用於回覆此詢問。您的名字和電子郵件地址不會加入到任何郵件清單,並且除非有所要求,您也不會從 Intel Corporation 收到電子郵件。按下「送出」確認您接受 Intel 使用條款並且瞭解 Intel 隱私權政策。