Intel®資料移轉軟體

版本: 3.2 (先前發佈的) 日期: 2018/7/10

可用下載

IDMS_12640.zip

Windows 10*
Windows* 8.1
Windows 8*
Windows 7*
Windows Vista*

英文

445.23 MB

fac479eee193b93eb9cf558471974e62

下載

其他版本

詳細說明:

 

Intel®資料移轉軟體(DMS)會將硬碟的內容從舊的儲存裝置複製到新的 Intel®固態硬碟(Intel® SSD)。

在使用 Intel 資料移轉軟體之前,請查閱資料移轉軟體使用者指南以瞭解程式與系統需求。資料移轉軟體需要至少一個 Intel SSD 才能連接到系統。
安裝您的 Intel® SSD 和 Intel 資料移轉軟體後,軟體將會同時檢測您的舊磁片磁碟機,並引導您完成克隆程式,showomg 如何將您的所有資料從舊硬碟移至較新的 SSD。開始之前,請確認舊硬碟上的資料量沒有超過新 SSD 的大小。

Intel SSD 轉銷商或零售箱中包含哪些內容

-Intel SSD (所有型號)
-SATA-SATA 纜線,用於將儲存裝置連接到桌上型電腦
電腦(僅限 K5 模式)
-2.5 「至3.5」安裝支架,用於將您的2.5 「SSD」裝載到3.5 中」
您的桌上型電腦箱(僅限 R5 和 K5 機型)
-連結至下載 Intel 資料移轉軟體

您需要的東西

-電腦具備所需的系統規格(如下所示)
-螺絲刀 ~ 3mm
-如果您要安裝在筆記本電腦上,協力廠商 SATA 對 USB 纜線
可能需要適配配接器。**

* * 請注意:有些協力廠商纜線或介面卡可使用(USB 至 SATA,USB 至 M. 2),但這很重要的是,纜線或介面卡會將正確的型號字串匯出至作業系統。如果 Intel 資料移轉軟體沒有接收到正確的模型字串,就無法在作業系統中偵測到磁片磁碟機,也就不會安裝。纜線或介面卡必須提供電力才能執行硬碟。若不加電,磁片磁碟機就會離線,克隆也會失敗。

所需的系統規格

Intel 資料移轉軟體的硬體要求與 Intel 資料移轉軟體所使用的電腦作業系統的最低要求相一致。此外,Intel 資料移轉軟體也需要以下的硬體:
-連接的 Intel SSD

Intel 資料移轉軟體修復媒體具有下列硬體要求:
-1GB RAM
-處理器 1 GHz 或更快
-建議的最低螢幕解析度為1152x720
-支援的作業系統為 Microsoft Windows Vista *、Windows 7 *、Windows 8 *、Windows 8.1 * 和 Windows®10。

Intel 資料移轉軟體與 Macintosh 電腦不相容。如果您使用的是 Mac * 作業系統,可使用多種免費工具進行克隆,例如抄送 Cloner,如下所示:HTTP://www.bombich.com/

您的 Intel SSD 有關于在系統中實際安裝硬碟的說明。請參考這些說明。

Intel SSD 升級套件(僅限 K5 型號)附帶了專為在桌上型電腦上進行資料移轉而設計的纜線。如果您使用筆記本電腦或 netbook,您可以購買協力廠商硬體介面來遷移資料。

Intel 資料移轉軟體具備下列語言:
英文、日文、韓文、簡體和繁體中文、巴西葡萄牙文、西班牙文、法文、義大利文、德語、波蘭文和俄語

安裝資料移轉軟體後,就可以在「協助」功能表中變更該語言。

此資訊結合人工翻譯和電腦翻譯原始的內容,方便您使用。此內容僅提供一般資訊,請勿將其視為完整或精確而仰賴之。

發行說明

此下載檔案適用於下列產品。

Intel 軟體授權合約

X

本份軟體授權合約條款係規範您使用軟體的情形,適用於您下載的任何軟體。

INTEL SOFTWARE LICENSE AGREEMENT

IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING.

Do not use or load this software and any associated materials (collectively,

the "Software") until you have carefully read the following terms and

conditions. By loading or using the Software, you agree to the terms of this

Agreement. If you do not wish to so agree, do not install or use the Software.

LICENSES: Please Note:

- If you are a network administrator, the "Site License" below shall

apply to you.

- If you are an end user, the "Single User License" shall apply to you.

- If you are an original equipment manufacturer (OEM), the "OEM License"

shall apply to you.

SITE LICENSE. You may copy the Software onto your organization's computers

for your organization's use, and you may make a reasonable number of

back-up copies of the Software, subject to these conditions:

1. This Software is licensed for use only in conjunction with Intel

component products. Use of the Software in conjunction with non-Intel

component products is not licensed hereunder.

2. You may not copy, modify, rent, sell, distribute or transfer any part

of the Software except as provided in this Agreement, and you agree to

prevent unauthorized copying of the Software.

3. You may not reverse engineer, decompile, or disassemble the Software.

4. You may not sublicense or permit simultaneous use of the Software by

more than one user.

5. The Software may include portions offered on terms in addition to those

set out here, as set out in a license accompanying those portions.

SINGLE USER LICENSE. You may copy the Software onto a single computer for

your personal, noncommercial use, and you may make one back-up copy of the

Software, subject to these conditions:

1. This Software is licensed for use only in conjunction with Intel

component products. Use of the Software in conjunction with non-Intel

component products is not licensed hereunder.

2. You may not copy, modify, rent, sell, distribute or transfer any part

of the Software except as provided in this Agreement, and you agree to

prevent unauthorized copying of the Software.

3. You may not reverse engineer, decompile, or disassemble the Software.

4. You may not sublicense or permit simultaneous use of the Software by

more than one user.

5. The Software may include portions offered on terms in addition to those

set out here, as set out in a license accompanying those portions.

OEM LICENSE: You may reproduce and distribute the Software only as an

integral part of or incorporated in Your product or as a standalone

Software maintenance update for existing end users of Your products,

excluding any other standalone products, subject to these conditions:

1. This Software is licensed for use only in conjunction with Intel

component products. Use of the Software in conjunction with non-Intel

component products is not licensed hereunder.

2. You may not copy, modify, rent, sell, distribute or transfer any part

of the Software except as provided in this Agreement, and you agree to

prevent unauthorized copying of the Software.

3. You may not reverse engineer, decompile, or disassemble the Software.

4. You may only distribute the Software to your customers pursuant to a

written license agreement. Such license agreement may be a "break-the-

seal" license agreement. At a minimum such license shall safeguard

Intel's ownership rights to the Software.

5. The Software may include portions offered on terms in addition to those

set out here, as set out in a license accompanying those portions.

NO OTHER RIGHTS. No rights or licenses are granted by Intel to You, expressly

or by implication, with respect to any proprietary information or patent,

copyright, mask work, trademark, trade secret, or other intellectual property

right owned or controlled by Intel, except as expressly provided in this

Agreement.

OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Software

remains with Intel or its suppliers. The Software is copyrighted and

protected by the laws of the United States and other countries, and

international treaty provisions. You may not remove any copyright notices

from the Software. Intel may make changes to the Software, or to items

referenced therein, at any time without notice, but is not obligated to

support or update the Software. Except as otherwise expressly provided, Intel

grants no express or implied right under Intel patents, copyrights,

trademarks, or other intellectual property rights. You may transfer the

Software only if the recipient agrees to be fully bound by these terms and if

you retain no copies of the Software.

LIMITED MEDIA WARRANTY. If the Software has been delivered by Intel on

physical media, Intel warrants the media to be free from material physical

defects for a period of ninety days after delivery by Intel. If such a defect

is found, return the media to Intel for replacement or alternate delivery of

the Software as Intel may select.

EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE, THE SOFTWARE IS

PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED WARRANTY OF ANY KIND

INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, OR FITNESS FOR A

PARTICULAR PURPOSE. Intel does not warrant or assume responsibility for the

accuracy or completeness of any information, text, graphics, links or other

items contained within the Software.

LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS SUPPLIERS BE LIABLE

FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, LOST PROFITS,

BUSINESS INTERRUPTION, OR LOST INFORMATION) ARISING OUT OF THE USE OF OR

INABILITY TO USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT EXCLUSION OR

LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES OR CONSEQUENTIAL OR INCIDENTAL

DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE

OTHER LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION.

TERMINATION OF THIS AGREEMENT. Intel may terminate this Agreement at any time

if you violate its terms. Upon termination, you will immediately destroy the

Software or return all copies of the Software to Intel.

APPLICABLE LAWS. Claims arising under this Agreement shall be governed by the

laws of California, excluding its principles of conflict of laws and the

United Nations Convention on Contracts for the Sale of Goods. You may not

export the Software in violation of applicable export laws and regulations.

Intel is not obligated under any other agreements unless they are in writing

and signed by an authorized representative of Intel.

GOVERNMENT RESTRICTED RIGHTS. The Software is provided with "RESTRICTED

RIGHTS." Use, duplication, or disclosure by the Government is subject to

restrictions as set forth in FAR52.227-14 and DFAR252.227-7013 et seq. or its

successor. Use of the Software by the Government constitutes acknowledgment

of Intel's proprietary rights therein. Contractor or Manufacturer is Intel

2200 Mission College Blvd., Santa Clara, CA 95052.

我接受這份授權合約

我不接受這份授權合約

支援產品焦點、焦點內容等

產品支援

支援產品焦點、焦點內容等

向支援社群詢問

向支援社群詢問

各領域的專家可提供協助

提供意見回饋

我們的目標是要讓「下載中心」成為對您有價值的資源。請在這裡提交您的意見、問題或建議。

需要 Intel® 產品方面的協助嗎?聯絡支援

您是否覺得此網站上的資訊實用?

您的個人資訊將僅用於回覆此詢問。您的名字和電子郵件地址不會加入到任何郵件清單,並且除非有所要求,您也不會從 Intel Corporation 收到電子郵件。按下「送出」確認您接受 Intel 使用條款並且瞭解 Intel 隱私權政策。