Intel® SSD 資料中心工具 Intel® SSD 910 系列

版本: 1.1 (最新的) 日期: 2013/7/25

可用下載

Intel SSD Data Center Tool 1_1_0 Linux.tar

Red Hat Enterprise Linux* 6
Red Hat Enterprise Linux* 5
SUSE Linux Enterprise Server 11*

英文

5.26 MB

下載

Intel SSD Data Center Tool 1_1_0 Windows.zip

Windows 7*
Windows Server 2008 R2*
Windows Server 2003*

英文

2.55 MB

下載

詳細說明:

請參閱最新版本的Intel® SSD 資料中心工具

英特爾®固態硬碟資料中心工具 (英特爾®固態硬碟 DCT) 是英特爾®固態硬碟910系列的磁碟機管理軟體, 提供以下功能:

  • 檢測連接到系統的 PCIe * 設備和相關磁碟機。
  • 通過發出 SCSI 全格式單元命令擦除 SSD 上的資料。
  • 通過更改 SSD 的最大邏輯塊位址 (LBA) 來調整 ssd 的大小。
  • 更新固態硬碟的固件。
  • 向 SSD 發出 SCSI 讀寫命令。
  • 讀取和分析 SCSI 查詢頁和日誌頁。
  • 通過更改電源設置配置來更改磁碟機性能。

此工具的使用者介面是 Windows * 和 Linux * 的命令列介面。

僅支援64位作業系統 (僅限英文版本)。

ZIP (適用于 Microsoft Windows *) 和 TAR (適用于 Linux *) 檔都包括使用者指南和軟體 許可證的副本。

若要安裝, 請下載包含《使用者指南》、許可證和工具本身的 ZIP 或 TAR 檔。提取檔並在包含Intel® SSD 910 系列 主機系統上運行該工具。

筆記:
-910 系列資料中心工具提供了一個説明螢幕, 提供了更多資訊。
-此工具的 Windows * 和 Linux * 版本都基於命令列。
-Intel® SSD 工具箱 不適用於Intel® SSD 910 系列。
-Intel® SSD 工具箱 不適用於 linux *。

在 Microsoft Windows 7 * 和 Microsoft Windows Server 2008*/R2 * 上, 通過以下方法之一獲取管理員存取權限:

  • 以管理員身份打開命令提示符, 並通過下面列出的命令運行該工具。
  • 在適用的情況下禁用 UAC, 並通過在命令提示符下運行它來運行它。

在 Linux * 系統上, 通過 sudo 或 su 命令使用根許可權運行該工具。Linux * 使用者必須確保該工具具有可執行許可權。

如果您在安裝方面需要幫助或使用該工具出現問題, 請聯繫Intel 客戶支援

Intel® SSD 資料中心工具 支援以下英特爾®固態硬碟上的固件更新;

最新固件版本:

  • 英特爾®固態硬碟910系列 400 GB-1200C008A424
  • 英特爾®固態硬碟910系列 800 GB-1200D006A424

Intel® SSD 資料中心工具 不支援 任何其他英特爾®固態硬碟。

此資訊結合人工翻譯和電腦翻譯原始的內容,方便您使用。此內容僅提供一般資訊,請勿將其視為完整或精確而仰賴之。

發行說明

此下載檔案適用於下列產品。

Intel 軟體授權合約

X

本份軟體授權合約條款係規範您使用軟體的情形,適用於您下載的任何軟體。

INTEL SOFTWARE LICENSE AGREEMENT

IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING.

Do not use or load this software and any associated materials (collectively,

the "Software") until you have carefully read the following terms and

conditions. By loading or using the Software, you agree to the terms of this

Agreement. If you do not wish to so agree, do not install or use the Software.

LICENSES: Please Note:

- If you are a network administrator, the "Site License" below shall

apply to you.

- If you are an end user, the "Single User License" shall apply to you.

- If you are an original equipment manufacturer (OEM), the "OEM License"

shall apply to you.

SITE LICENSE. You may copy the Software onto your organization's computers

for your organization's use, and you may make a reasonable number of

back-up copies of the Software, subject to these conditions:

1. This Software is licensed for use only in conjunction with Intel

component products. Use of the Software in conjunction with non-Intel

component products is not licensed hereunder.

2. You may not copy, modify, rent, sell, distribute or transfer any part

of the Software except as provided in this Agreement, and you agree to

prevent unauthorized copying of the Software.

3. You may not reverse engineer, decompile, or disassemble the Software.

4. You may not sublicense or permit simultaneous use of the Software by

more than one user.

5. The Software may include portions offered on terms in addition to those

set out here, as set out in a license accompanying those portions.

SINGLE USER LICENSE. You may copy the Software onto a single computer for

your personal, noncommercial use, and you may make one back-up copy of the

Software, subject to these conditions:

1. This Software is licensed for use only in conjunction with Intel

component products. Use of the Software in conjunction with non-Intel

component products is not licensed hereunder.

2. You may not copy, modify, rent, sell, distribute or transfer any part

of the Software except as provided in this Agreement, and you agree to

prevent unauthorized copying of the Software.

3. You may not reverse engineer, decompile, or disassemble the Software.

4. You may not sublicense or permit simultaneous use of the Software by

more than one user.

5. The Software may include portions offered on terms in addition to those

set out here, as set out in a license accompanying those portions.

OEM LICENSE: You may reproduce and distribute the Software only as an

integral part of or incorporated in Your product or as a standalone

Software maintenance update for existing end users of Your products,

excluding any other standalone products, subject to these conditions:

1. This Software is licensed for use only in conjunction with Intel

component products. Use of the Software in conjunction with non-Intel

component products is not licensed hereunder.

2. You may not copy, modify, rent, sell, distribute or transfer any part

of the Software except as provided in this Agreement, and you agree to

prevent unauthorized copying of the Software.

3. You may not reverse engineer, decompile, or disassemble the Software.

4. You may only distribute the Software to your customers pursuant to a

written license agreement. Such license agreement may be a "break-the-

seal" license agreement. At a minimum such license shall safeguard

Intel's ownership rights to the Software.

5. The Software may include portions offered on terms in addition to those

set out here, as set out in a license accompanying those portions.

NO OTHER RIGHTS. No rights or licenses are granted by Intel to You, expressly

or by implication, with respect to any proprietary information or patent,

copyright, mask work, trademark, trade secret, or other intellectual property

right owned or controlled by Intel, except as expressly provided in this

Agreement.

OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Software

remains with Intel or its suppliers. The Software is copyrighted and

protected by the laws of the United States and other countries, and

international treaty provisions. You may not remove any copyright notices

from the Software. Intel may make changes to the Software, or to items

referenced therein, at any time without notice, but is not obligated to

support or update the Software. Except as otherwise expressly provided, Intel

grants no express or implied right under Intel patents, copyrights,

trademarks, or other intellectual property rights. You may transfer the

Software only if the recipient agrees to be fully bound by these terms and if

you retain no copies of the Software.

LIMITED MEDIA WARRANTY. If the Software has been delivered by Intel on

physical media, Intel warrants the media to be free from material physical

defects for a period of ninety days after delivery by Intel. If such a defect

is found, return the media to Intel for replacement or alternate delivery of

the Software as Intel may select.

EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE, THE SOFTWARE IS

PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED WARRANTY OF ANY KIND

INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, OR FITNESS FOR A

PARTICULAR PURPOSE. Intel does not warrant or assume responsibility for the

accuracy or completeness of any information, text, graphics, links or other

items contained within the Software.

LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS SUPPLIERS BE LIABLE

FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, LOST PROFITS,

BUSINESS INTERRUPTION, OR LOST INFORMATION) ARISING OUT OF THE USE OF OR

INABILITY TO USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT EXCLUSION OR

LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES OR CONSEQUENTIAL OR INCIDENTAL

DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE

OTHER LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION.

TERMINATION OF THIS AGREEMENT. Intel may terminate this Agreement at any time

if you violate its terms. Upon termination, you will immediately destroy the

Software or return all copies of the Software to Intel.

APPLICABLE LAWS. Claims arising under this Agreement shall be governed by the

laws of California, excluding its principles of conflict of laws and the

United Nations Convention on Contracts for the Sale of Goods. You may not

export the Software in violation of applicable export laws and regulations.

Intel is not obligated under any other agreements unless they are in writing

and signed by an authorized representative of Intel.

GOVERNMENT RESTRICTED RIGHTS. The Software is provided with "RESTRICTED

RIGHTS." Use, duplication, or disclosure by the Government is subject to

restrictions as set forth in FAR52.227-14 and DFAR252.227-7013 et seq. or its

successor. Use of the Software by the Government constitutes acknowledgment

of Intel's proprietary rights therein. Contractor or Manufacturer is Intel

2200 Mission College Blvd., Santa Clara, CA 95052.

我接受這份授權合約

我不接受這份授權合約

提供意見回饋

我們的目標是要讓「下載中心」成為對您有價值的資源。請在這裡提交您的意見、問題或建議。

需要 Intel® 產品方面的協助嗎?聯絡支援

您是否覺得此網站上的資訊實用?

您的個人資訊將僅用於回覆此詢問。您的名字和電子郵件地址不會加入到任何郵件清單,並且除非有所要求,您也不會從 Intel Corporation 收到電子郵件。按下「送出」確認您接受 Intel 使用條款並且瞭解 Intel 隱私權政策。