独立于操作系统
英语
31.4 MB
d672a31b073a700438de95fb1f144621
注意:
如果系统是适用于 Nutanix 企业云的英特尔® 数据中心模块,则不要使用此软件更新包 (SUP),该系统依赖于 Nutanix* 的 Nutanix* Nut Cycle Cycle Manager 进行任何固件更新。如要了解更多信息,请访问 Nutanix* 生命周期管理器页面。有关硬件和固件兼容性的列表,请访问 Nutanix* 硬件和固件兼容性页面。
固件要求
要更新系统固件堆栈至此更新包中包含的版本 ,系统 上当前加载的系统固件堆栈 必须满足以下要求:
无法进入所需的固件堆栈,可能会导致意外结果。
概述
此下载记录包含用于英特尔技术嵌入式统一可扩展固件接口 (UEFI) 外壳的 英特尔® Server Board S2600WF 家族和相应的 英特尔® Server System R1000WF 家族和 英特尔® Server System R2000WF 家族的 BIOS 和固件更新包。
目的
此固件更新包支持第一代和二代英特尔® 至强®可扩展处理器家族
此更新包包括以下生产级系统固件更新,包括固件 01.02.00.5395(适用于英特尔® 傲腾™ DC内存)。如果您收到带英特尔® 傲腾™ DC持久内存 DIMM 的持久内存 DIMM,请按照以下一般安装过程安装此 DIMM:
重要提示:
从 BMC 2.22.59c3b83a 开始,在 BMC EWS 上将 KCS 策略控制模式配置为"拒绝所有"时,BMC 和 FRUSDR 无法像预期行为一样升级/降级。更新仍可以通过 Redfish 或 BMC EWS 执行
此 SUP 软件包包括适用于 英特尔® 傲腾™ DC 持久内存 (DCPMM) 的 FW 01.02.00.5417,如果您收到具有不同的 FW 的 DCPMM DIMM,请按照下面的一般安装过程安装此驱动程序。
由于 BMC 固件 1.90(Cipher Suite 3 被禁用,并且只能默认保持密码套件 17 的打开),因此通过 LAN 为 ipmcipcipol 添加额外参数是必需的,因此在使用 ipmcipol 访问 BMC LAN 时,必须使用"-C 17"。
Cipher Suite 17 于 2016 年 10 月 8 日在 ipmcipol 1.8.18 中首次推出,您必须将 ipmcipol 更新到此版本或更高版本,早期版本的 ipmcipol 不支持 Cipher 17。
在高负载网络中运行时,ipm 500ol 运行不很好。我们建议通过使用"-N 5"添加额外的超时。对于 RMCP+,默认值为 1 秒,这是不够的。–N 5 将设置 5 秒作为超时。
因此,命令将如下所示:
ipmplusol – I lanplus –H ip -U 用户 -P 密码 –C 17 -N 5 命令
请参阅包含的"TA-1143_Extra_parameters_needed_for_ipmitool.pdf"了解更多信息。
由于安全修订版更改,不支持将 BMC 降级为 1.43.660a4315。
一般安装过程
其他注释
您下载的任何软件中携带的软件许可协议条款控制您对软件的使用。
IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING.
Do not use or load this software and any associated materials (collectively,
the "Software") until you have carefully read the following terms and
conditions. By loading or using the Software, you agree to the terms of this
Agreement. If you do not wish to so agree, do not install or use the Software.
LICENSES: Please Note:
- If you are a network administrator, the "Site License" below shall
apply to you.
- If you are an end user, the "Single User License" shall apply to you.
- If you are an original equipment manufacturer (OEM), the "OEM License"
shall apply to you.
SITE LICENSE. You may copy the Software onto your organization's computers
for your organization's use, and you may make a reasonable number of
back-up copies of the Software, subject to these conditions:
1. This Software is licensed for use only in conjunction with Intel
component products. Use of the Software in conjunction with non-Intel
component products is not licensed hereunder.
2. You may not copy, modify, rent, sell, distribute or transfer any part
of the Software except as provided in this Agreement, and you agree to
prevent unauthorized copying of the Software.
3. You may not reverse engineer, decompile, or disassemble the Software.
4. You may not sublicense or permit simultaneous use of the Software by
more than one user.
5. The Software may include portions offered on terms in addition to those
set out here, as set out in a license accompanying those portions.
SINGLE USER LICENSE. You may copy the Software onto a single computer for
your personal, noncommercial use, and you may make one back-up copy of the
Software, subject to these conditions:
1. This Software is licensed for use only in conjunction with Intel
component products. Use of the Software in conjunction with non-Intel
component products is not licensed hereunder.
2. You may not copy, modify, rent, sell, distribute or transfer any part
of the Software except as provided in this Agreement, and you agree to
prevent unauthorized copying of the Software.
3. You may not reverse engineer, decompile, or disassemble the Software.
4. You may not sublicense or permit simultaneous use of the Software by
more than one user.
5. The Software may include portions offered on terms in addition to those
set out here, as set out in a license accompanying those portions.
OEM LICENSE: You may reproduce and distribute the Software only as an
integral part of or incorporated in Your product or as a standalone
Software maintenance update for existing end users of Your products,
excluding any other standalone products, subject to these conditions:
1. This Software is licensed for use only in conjunction with Intel
component products. Use of the Software in conjunction with non-Intel
component products is not licensed hereunder.
2. You may not copy, modify, rent, sell, distribute or transfer any part
of the Software except as provided in this Agreement, and you agree to
prevent unauthorized copying of the Software.
3. You may not reverse engineer, decompile, or disassemble the Software.
4. You may only distribute the Software to your customers pursuant to a
written license agreement. Such license agreement may be a "break-the-
seal" license agreement. At a minimum such license shall safeguard
Intel's ownership rights to the Software.
5. The Software may include portions offered on terms in addition to those
set out here, as set out in a license accompanying those portions.
NO OTHER RIGHTS. No rights or licenses are granted by Intel to You, expressly
or by implication, with respect to any proprietary information or patent,
copyright, mask work, trademark, trade secret, or other intellectual property
right owned or controlled by Intel, except as expressly provided in this
Agreement.
OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Software
remains with Intel or its suppliers. The Software is copyrighted and
protected by the laws of the United States and other countries, and
international treaty provisions. You may not remove any copyright notices
from the Software. Intel may make changes to the Software, or to items
referenced therein, at any time without notice, but is not obligated to
support or update the Software. Except as otherwise expressly provided, Intel
grants no express or implied right under Intel patents, copyrights,
trademarks, or other intellectual property rights. You may transfer the
Software only if the recipient agrees to be fully bound by these terms and if
you retain no copies of the Software.
LIMITED MEDIA WARRANTY. If the Software has been delivered by Intel on
physical media, Intel warrants the media to be free from material physical
defects for a period of ninety days after delivery by Intel. If such a defect
is found, return the media to Intel for replacement or alternate delivery of
the Software as Intel may select.
EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE, THE SOFTWARE IS
PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED WARRANTY OF ANY KIND
INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, OR FITNESS FOR A
PARTICULAR PURPOSE. Intel does not warrant or assume responsibility for the
accuracy or completeness of any information, text, graphics, links or other
items contained within the Software.
LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS SUPPLIERS BE LIABLE
FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, LOST PROFITS,
BUSINESS INTERRUPTION, OR LOST INFORMATION) ARISING OUT OF THE USE OF OR
INABILITY TO USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT EXCLUSION OR
LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES OR CONSEQUENTIAL OR INCIDENTAL
DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE
OTHER LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION.
TERMINATION OF THIS AGREEMENT. Intel may terminate this Agreement at any time
if you violate its terms. Upon termination, you will immediately destroy the
Software or return all copies of the Software to Intel.
APPLICABLE LAWS. Claims arising under this Agreement shall be governed by the
laws of California, excluding its principles of conflict of laws and the
United Nations Convention on Contracts for the Sale of Goods. You may not
export the Software in violation of applicable export laws and regulations.
Intel is not obligated under any other agreements unless they are in writing
and signed by an authorized representative of Intel.
GOVERNMENT RESTRICTED RIGHTS. The Software is provided with "RESTRICTED
RIGHTS." Use, duplication, or disclosure by the Government is subject to
restrictions as set forth in FAR52.227-14 and DFAR252.227-7013 et seq. or its
successor. Use of the Software by the Government constitutes acknowledgment
of Intel's proprietary rights therein. Contractor or Manufacturer is Intel
2200 Mission College Blvd., Santa Clara, CA 95052.
我们的目标是使下载中心成为您的一个有价值的资源。请在此处提交您的意见、问题或建议。
需要获得对英特尔® 产品的帮助吗?联系支持人员
您的个人信息将仅用于对此查询作出回应。您的姓名和电子邮件地址将不会添加到任何邮寄列表中;您也不会在未经请求的情况下收到来自英特尔公司的电子邮件。单击“提交”即确认您接受英特尔的使用条款,并了解英特尔的隐私策略。