适用于 EFI 的英特尔® Server Board S2600TP 家族固件更新软件包

版本: 1.01.0028 (先前发行的) 日期: 2019/4/23

可供下载

S2600TP_EFI_BIOS01010028_ME030103051_BMC0156r11315_FRUSDR_117.zip

独立于操作系统

英语

21.56 MB

ffae47b4d6fb9f63dcbce7969271e3e9

下载

其他版本

详细描述

固件要求
要将系统固件堆栈更新为 此更新软件包中包含 的版本, 系统上当前加载的系统固件堆栈必须满足以下要求:

  • 系统 BIOS- 01.01.0005
  • ME 固件- 03.00.07.114
  • BMC 固件- 1.07.6909  

无法进入所需的固件堆栈,可能会导致意外的结果。

此更新软件包包括以下生产级系统软件更新和更新实用程序:

系统 BIOS-01.01.0028
ME 固件-03.01.03.051
BMC 固件-01.56.11315
FRUSDR-1.17
iFlash32 版本14.0 内部版本12
fwpiaupd 版本14.0 内部版本9
frusdr 版 efi-版本14.0 构建11

联系英特尔,以了解预生产硬件支持要求

重要说明:

-此软件包中提供的所有更新仅使用嵌入式 uEFI 操作环境安装。

-不要修改任何脚本文件。编写的脚本将提供最可靠的更新体验。

-如果由于任何原因系统 BIOS、BMC 固件或 FRU & SDR 数据在初始更新执行后都需要重新安装,则软件包确实包含可单独运行的独立脚本文件。这些文件包括:

UpdALL STARTUP.NSH、UpdBIOS. STARTUP.NSH、UpdME、startup.nsh、UpdFD Startup.nsh、UPDBMC 和 Startup.nsh。 UpdFRUSDR。

在最初使用启动更新系统之前,不要使用这些文件。STARTUP.NSH 文件。

注意:
当使用 BMC 更新 BMC 固件时。STARTUP.NSH 更新脚本文件,此发行版中的 BMC 闪存和 BIOS USB 驱动程序之间存在交互,这可能会导致在 BMC 更新完成后,随机字符(通常是字母 "e")出现在命令行中。在 BMC 闪存后重新启动便会清除此错误。

有关预 productin 的硬件和软件支持要求,请联系英特尔以了解详细信息

更新过程
-解压缩更新包的内容,并将所有文件复制到 USB 闪存驱动器上的根目录中
-将 USB 闪存驱动器插入服务器系统上的任何可用 USB 端口,以供更新
-打开服务器电源
-系统将自动访问 uEFI shell 并开始更新过程。

-如果文件被复制到根目录以外的其他文件夹中,请将服务器引导至 uEFI shell。这可以通过 BIOS 设置实用程序在 POST 过程中或通过开机自检过程中访问的引导菜单来访问。
-在 uEFI shell 中运行命令 "map-r" 以装入 USB 闪存驱动器
-运行命令 "fs0:" 以将文件夹更改为 USB 闪存驱动器。USB 闪存盘可能还会装载到 fs1:具体取决于其他已安装的设备。"Fs #" 的数量取决于命令 "map-r" 的结果
-将文件夹更改为保存更新包文件的文件夹,并手动启动 "startup.nsh" 脚本文件以开始加载所有更新

-在更新过程成功完成后重新启动系统

建议注意:
每当系统 BIOS 更新时,就会安装两个 BIOS 映像,一个主映像和一个备份映像。在主 BIOS 映像更新后的第一次系统重新启动过程中,会加载备份映像。在第一次系统重新启动过程中,屏幕将显示为大约2分钟,而备份 BIOS 映像
正在加载。在此期间,请勿关闭或重新启动系统。
当备份 BIOS 映像更新完成时,将在屏幕上显示一条消息。

验证更新:

-在 POST 过程中,当提示您访问 BIOS 设置实用程序时点击该键
-从 BIOS 设置实用程序主菜单,按下密钥以加载 BIOS 默认值
-在主菜单中,验证 BIOS 版本是否正确
-将光标移动到服务器管理菜单
-将光标向下移动到系统信息选项,然后按 Enter 键
-验证 BMC 固件版本是否正确
-验证 SDR 版本是否正确
-验证 ME 固件的版本是否正确
-配置所需的 BIOS 选项设置
-按 F10 键以保存更改并退出

系统软件更新已完成。

警告:
在更新过程中,不要中断或重新启动系统或移除电源
这样做可能会导致您的系统不可操作!

请勿在将系统软件加载到系统后再尝试关闭修订版。
这样做可能会导致您的系统不可操作!

请参阅发行说明 自述文件,了解安装说明、支持的硬件、新功能、缺陷修复和已知问题。

此信息是对原始内容进行机器翻译和人工翻译的结果,仅为您的便利而提供。此内容仅提供用于一般参考,不应将其作为完整或准确的信息予以依赖。

下载文档

此下载包对下面列出的产品有效。

英特尔软件许可协议

X

您下载的任何软件中携带的软件许可协议条款控制您对软件的使用。

INTEL SOFTWARE LICENSE AGREEMENT

IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING.

Do not use or load this software and any associated materials (collectively,

the "Software") until you have carefully read the following terms and

conditions. By loading or using the Software, you agree to the terms of this

Agreement. If you do not wish to so agree, do not install or use the Software.

LICENSES: Please Note:

- If you are a network administrator, the "Site License" below shall

apply to you.

- If you are an end user, the "Single User License" shall apply to you.

- If you are an original equipment manufacturer (OEM), the "OEM License"

shall apply to you.

SITE LICENSE. You may copy the Software onto your organization's computers

for your organization's use, and you may make a reasonable number of

back-up copies of the Software, subject to these conditions:

1. This Software is licensed for use only in conjunction with Intel

component products. Use of the Software in conjunction with non-Intel

component products is not licensed hereunder.

2. You may not copy, modify, rent, sell, distribute or transfer any part

of the Software except as provided in this Agreement, and you agree to

prevent unauthorized copying of the Software.

3. You may not reverse engineer, decompile, or disassemble the Software.

4. You may not sublicense or permit simultaneous use of the Software by

more than one user.

5. The Software may include portions offered on terms in addition to those

set out here, as set out in a license accompanying those portions.

SINGLE USER LICENSE. You may copy the Software onto a single computer for

your personal, noncommercial use, and you may make one back-up copy of the

Software, subject to these conditions:

1. This Software is licensed for use only in conjunction with Intel

component products. Use of the Software in conjunction with non-Intel

component products is not licensed hereunder.

2. You may not copy, modify, rent, sell, distribute or transfer any part

of the Software except as provided in this Agreement, and you agree to

prevent unauthorized copying of the Software.

3. You may not reverse engineer, decompile, or disassemble the Software.

4. You may not sublicense or permit simultaneous use of the Software by

more than one user.

5. The Software may include portions offered on terms in addition to those

set out here, as set out in a license accompanying those portions.

OEM LICENSE: You may reproduce and distribute the Software only as an

integral part of or incorporated in Your product or as a standalone

Software maintenance update for existing end users of Your products,

excluding any other standalone products, subject to these conditions:

1. This Software is licensed for use only in conjunction with Intel

component products. Use of the Software in conjunction with non-Intel

component products is not licensed hereunder.

2. You may not copy, modify, rent, sell, distribute or transfer any part

of the Software except as provided in this Agreement, and you agree to

prevent unauthorized copying of the Software.

3. You may not reverse engineer, decompile, or disassemble the Software.

4. You may only distribute the Software to your customers pursuant to a

written license agreement. Such license agreement may be a "break-the-

seal" license agreement. At a minimum such license shall safeguard

Intel's ownership rights to the Software.

5. The Software may include portions offered on terms in addition to those

set out here, as set out in a license accompanying those portions.

NO OTHER RIGHTS. No rights or licenses are granted by Intel to You, expressly

or by implication, with respect to any proprietary information or patent,

copyright, mask work, trademark, trade secret, or other intellectual property

right owned or controlled by Intel, except as expressly provided in this

Agreement.

OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Software

remains with Intel or its suppliers. The Software is copyrighted and

protected by the laws of the United States and other countries, and

international treaty provisions. You may not remove any copyright notices

from the Software. Intel may make changes to the Software, or to items

referenced therein, at any time without notice, but is not obligated to

support or update the Software. Except as otherwise expressly provided, Intel

grants no express or implied right under Intel patents, copyrights,

trademarks, or other intellectual property rights. You may transfer the

Software only if the recipient agrees to be fully bound by these terms and if

you retain no copies of the Software.

LIMITED MEDIA WARRANTY. If the Software has been delivered by Intel on

physical media, Intel warrants the media to be free from material physical

defects for a period of ninety days after delivery by Intel. If such a defect

is found, return the media to Intel for replacement or alternate delivery of

the Software as Intel may select.

EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE, THE SOFTWARE IS

PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED WARRANTY OF ANY KIND

INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, OR FITNESS FOR A

PARTICULAR PURPOSE. Intel does not warrant or assume responsibility for the

accuracy or completeness of any information, text, graphics, links or other

items contained within the Software.

LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS SUPPLIERS BE LIABLE

FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, LOST PROFITS,

BUSINESS INTERRUPTION, OR LOST INFORMATION) ARISING OUT OF THE USE OF OR

INABILITY TO USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT EXCLUSION OR

LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES OR CONSEQUENTIAL OR INCIDENTAL

DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE

OTHER LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION.

TERMINATION OF THIS AGREEMENT. Intel may terminate this Agreement at any time

if you violate its terms. Upon termination, you will immediately destroy the

Software or return all copies of the Software to Intel.

APPLICABLE LAWS. Claims arising under this Agreement shall be governed by the

laws of California, excluding its principles of conflict of laws and the

United Nations Convention on Contracts for the Sale of Goods. You may not

export the Software in violation of applicable export laws and regulations.

Intel is not obligated under any other agreements unless they are in writing

and signed by an authorized representative of Intel.

GOVERNMENT RESTRICTED RIGHTS. The Software is provided with "RESTRICTED

RIGHTS." Use, duplication, or disclosure by the Government is subject to

restrictions as set forth in FAR52.227-14 and DFAR252.227-7013 et seq. or its

successor. Use of the Software by the Government constitutes acknowledgment

of Intel's proprietary rights therein. Contractor or Manufacturer is Intel

2200 Mission College Blvd., Santa Clara, CA 95052.

我接受许可协议中的条款

我不接受许可协议中的条款

提供反馈

我们的目标是使下载中心成为您的一个有价值的资源。请在此处提交您的意见、问题或建议。

需要获得对英特尔® 产品的帮助吗?联系支持人员

您是否觉得此网站上的信息很有用?

您的个人信息将仅用于对此查询作出回应。您的姓名和电子邮件地址将不会添加到任何邮寄列表中;您也不会在未经请求的情况下收到来自英特尔公司的电子邮件。单击“提交”即确认您接受英特尔的使用条款,并了解英特尔的隐私策略。