英特尔®服务器主板 S2600WT BIOS 和适用于 EFI 的固件更新

版本: R01.01.0028 (最新) 日期: 2019/4/1

可供下载

S2600WT_EFI_BIOS01010028_ME030103051_BMC015611315_FRUSDR_118.zip

独立于操作系统

英语

21.23 MB

7ce29957c236933a149d4ff45d27e739

下载

其他版本

详细描述

uEFI 系统更新包 (SUP) 安装和操作说明

英特尔 强烈建议在执行之前阅读本文档全文
系统更新。验证您的系统是否符合记录的要求
将确保成功更新并提供最可靠的系统
更新完成后的功能。


发布于 - 2018年12月27日

********************************************************************************
此更新包包括以下生产级系统软件
更新和更新实用程序:

系统 BIOS - 01.01.0028
ME 固件 - 03.01.03.051
BMC 固件 - 01.56.11315
FRUSDR - 1.18
iFlash32.efi - 版本 14.0 生成 12
fwpiaupd.efi - 版本 14.0 生成 9
frusdr.efi - 版本 14.0 生成 11

--- 支持的产品---

英特尔® 服务器主板 S2600WT 家族

有关预生产硬件支持 要求,请与英特尔 联系

重要说明:


- 此软件包中提供的所有更新都使用嵌入式 uEFI 安装
仅操作环境。

- 不要修改任何脚本文件。编写的脚本将提供
最可靠的更新体验。

- 如果由于任何原因,系统 BIOS、BMC 固件或 FRU 和 SDR 数据需要
执行初始更新后重新安装,包执行
包括可单独运行的独立脚本文件。这些文件
包括:

上,上,上,NSH,updME.NSH,updFD.NSH updBMC.NSH,和UpdFRUSDR.NSH。

在最初使用系统更新之前,不要使用这些文件
启动。NSH 文件。

注意:
使用 BMC 更新 BMC 固件时。NSH 更新脚本文件,有
此版本中的 BMC 闪存和 BIOS USB 驱动程序之间的交互
这可能会导致随机字符(通常是字母"e")出现在
BMC 更新完成后的命令行。BMC 闪存后重新启动
将清除此错误。


********************************************************************************
系统软件 要求
********************************************************************************

将系统软件 堆栈更新到此更新中包含的版本
包,当前安装在目标服务器上的系统软件 堆栈
系统必须满足以下要求,否则更新将失败:

- 系统 BIOS - 生产版本 01.01.0005 或更高版本
- ME 固件 - 生产版本 03.00.07.114 或更高版本
- BMC 固件 - 生产版本 1.07.6909 或更高版本

有关硬件和软件支持 要求的预产品,请联系英特尔 了解详细信息

********************************************************************************
更新过程
********************************************************************************

- 解压缩更新包的内容,并将所有文件复制到 USB 闪存驱动器上的根目录
- 将 USB 闪存驱动器插入服务器系统上要更新的任何可用 USB 端口
- 打开服务器电源
- 系统将自动访问 uEFI 外壳并开始更新过程。

- 如果文件复制到根目录以外的文件夹,则启动服务器
uEFI 外壳。这可以通过 BIOS 设置实用程序在
开机自用或通过开机自通过菜单。
- 在 uEFI 外壳中运行命令"map-r"以安装 USB 闪存驱动器
- 运行命令"fs0:"将文件夹更改为 USB 闪存驱动器。USB
闪存驱动器也可能安装到 fs1:具体取决于其他已安装的设备。的
"fs_"的数量取决于命令"map-r"的结果
- 将文件夹更改为保存更新包文件的文件夹,然后手动
启动"启动.nsh"脚本文件以开始加载所有更新


- 更新过程成功完成后重新启动系统

咨询说明:
每当系统 BIOS 更新时,都会安装两个 BIOS 映像,一个
映像和备份映像。备份映像在第一次系统重新启动期间加载
更新主 BIOS 映像后。在第一次系统重新启动期间,
屏幕将空白约两分钟,而备份 BIOS 图像
正在加载。在此期间,请勿关闭或重新启动系统。
当备份 BIOS 映像更新时,屏幕上将显示一条消息
完成。

验证更新:

- 在"检"期间,在提示访问 BIOS 设置实用程序时点击密钥
- 从 BIOS 设置实用程序主菜单中,点击键加载 BIOS 默认值
- 在主菜单中验证 BIOS 修订是否正确
- 将光标移到服务器管理菜单
- 将光标向下移动到系统信息选项,然后点击"输入"
- 验证 BMC 固件版本是否正确
- 验证 SDR 修订是否正确
- 验证 ME 固件版本是否正确
- 配置所需的 BIOS 选项设置
- 点击 F10 键以保存更改并退出


系统软件 已完成。


警告: |
在更新过程中,请勿中断或重新启动或从系统断电。
这样做可能会导致您的系统无法运行!

加载到系统后,请勿尝试向下 更新系统软件。
这样做可能会导致您的系统无法运行!

 

此信息是对原始内容进行机器翻译和人工翻译的结果,仅为您的便利而提供。此内容仅提供用于一般参考,不应将其作为完整或准确的信息予以依赖。

发行说明

此下载包对下面列出的产品有效。

英特尔软件许可协议

X

您下载的任何软件中携带的软件许可协议条款控制您对软件的使用。

INTEL SOFTWARE LICENSE AGREEMENT

IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING.

Do not use or load this software and any associated materials (collectively,

the "Software") until you have carefully read the following terms and

conditions. By loading or using the Software, you agree to the terms of this

Agreement. If you do not wish to so agree, do not install or use the Software.

LICENSES: Please Note:

- If you are a network administrator, the "Site License" below shall

apply to you.

- If you are an end user, the "Single User License" shall apply to you.

- If you are an original equipment manufacturer (OEM), the "OEM License"

shall apply to you.

SITE LICENSE. You may copy the Software onto your organization's computers

for your organization's use, and you may make a reasonable number of

back-up copies of the Software, subject to these conditions:

1. This Software is licensed for use only in conjunction with Intel

component products. Use of the Software in conjunction with non-Intel

component products is not licensed hereunder.

2. You may not copy, modify, rent, sell, distribute or transfer any part

of the Software except as provided in this Agreement, and you agree to

prevent unauthorized copying of the Software.

3. You may not reverse engineer, decompile, or disassemble the Software.

4. You may not sublicense or permit simultaneous use of the Software by

more than one user.

5. The Software may include portions offered on terms in addition to those

set out here, as set out in a license accompanying those portions.

SINGLE USER LICENSE. You may copy the Software onto a single computer for

your personal, noncommercial use, and you may make one back-up copy of the

Software, subject to these conditions:

1. This Software is licensed for use only in conjunction with Intel

component products. Use of the Software in conjunction with non-Intel

component products is not licensed hereunder.

2. You may not copy, modify, rent, sell, distribute or transfer any part

of the Software except as provided in this Agreement, and you agree to

prevent unauthorized copying of the Software.

3. You may not reverse engineer, decompile, or disassemble the Software.

4. You may not sublicense or permit simultaneous use of the Software by

more than one user.

5. The Software may include portions offered on terms in addition to those

set out here, as set out in a license accompanying those portions.

OEM LICENSE: You may reproduce and distribute the Software only as an

integral part of or incorporated in Your product or as a standalone

Software maintenance update for existing end users of Your products,

excluding any other standalone products, subject to these conditions:

1. This Software is licensed for use only in conjunction with Intel

component products. Use of the Software in conjunction with non-Intel

component products is not licensed hereunder.

2. You may not copy, modify, rent, sell, distribute or transfer any part

of the Software except as provided in this Agreement, and you agree to

prevent unauthorized copying of the Software.

3. You may not reverse engineer, decompile, or disassemble the Software.

4. You may only distribute the Software to your customers pursuant to a

written license agreement. Such license agreement may be a "break-the-

seal" license agreement. At a minimum such license shall safeguard

Intel's ownership rights to the Software.

5. The Software may include portions offered on terms in addition to those

set out here, as set out in a license accompanying those portions.

NO OTHER RIGHTS. No rights or licenses are granted by Intel to You, expressly

or by implication, with respect to any proprietary information or patent,

copyright, mask work, trademark, trade secret, or other intellectual property

right owned or controlled by Intel, except as expressly provided in this

Agreement.

OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Software

remains with Intel or its suppliers. The Software is copyrighted and

protected by the laws of the United States and other countries, and

international treaty provisions. You may not remove any copyright notices

from the Software. Intel may make changes to the Software, or to items

referenced therein, at any time without notice, but is not obligated to

support or update the Software. Except as otherwise expressly provided, Intel

grants no express or implied right under Intel patents, copyrights,

trademarks, or other intellectual property rights. You may transfer the

Software only if the recipient agrees to be fully bound by these terms and if

you retain no copies of the Software.

LIMITED MEDIA WARRANTY. If the Software has been delivered by Intel on

physical media, Intel warrants the media to be free from material physical

defects for a period of ninety days after delivery by Intel. If such a defect

is found, return the media to Intel for replacement or alternate delivery of

the Software as Intel may select.

EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE, THE SOFTWARE IS

PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED WARRANTY OF ANY KIND

INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, OR FITNESS FOR A

PARTICULAR PURPOSE. Intel does not warrant or assume responsibility for the

accuracy or completeness of any information, text, graphics, links or other

items contained within the Software.

LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS SUPPLIERS BE LIABLE

FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, LOST PROFITS,

BUSINESS INTERRUPTION, OR LOST INFORMATION) ARISING OUT OF THE USE OF OR

INABILITY TO USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT EXCLUSION OR

LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES OR CONSEQUENTIAL OR INCIDENTAL

DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE

OTHER LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION.

TERMINATION OF THIS AGREEMENT. Intel may terminate this Agreement at any time

if you violate its terms. Upon termination, you will immediately destroy the

Software or return all copies of the Software to Intel.

APPLICABLE LAWS. Claims arising under this Agreement shall be governed by the

laws of California, excluding its principles of conflict of laws and the

United Nations Convention on Contracts for the Sale of Goods. You may not

export the Software in violation of applicable export laws and regulations.

Intel is not obligated under any other agreements unless they are in writing

and signed by an authorized representative of Intel.

GOVERNMENT RESTRICTED RIGHTS. The Software is provided with "RESTRICTED

RIGHTS." Use, duplication, or disclosure by the Government is subject to

restrictions as set forth in FAR52.227-14 and DFAR252.227-7013 et seq. or its

successor. Use of the Software by the Government constitutes acknowledgment

of Intel's proprietary rights therein. Contractor or Manufacturer is Intel

2200 Mission College Blvd., Santa Clara, CA 95052.

我接受许可协议中的条款

我不接受许可协议中的条款

提供反馈

我们的目标是使下载中心成为您的一个有价值的资源。请在此处提交您的意见、问题或建议。

需要获得对英特尔® 产品的帮助吗?联系支持人员

您是否觉得此网站上的信息很有用?

您的个人信息将仅用于对此查询作出回应。您的姓名和电子邮件地址将不会添加到任何邮寄列表中;您也不会在未经请求的情况下收到来自英特尔公司的电子邮件。单击“提交”即确认您接受英特尔的使用条款,并了解英特尔的隐私策略。