独立于操作系统
英语
46.85 MB
c70393b89e4b63700d0e62d003ff0ca6
uEFI 系统更新包 (SUP) 安装和操作
指示
英特尔 强烈建议在执行系统更新之前阅读本文档的全部内容。验证系统是否满足记录的要求将确保成功更新,并在更新完成后提供最可靠的系统功能。
发布于 - 2018年12月3日
********************************************************************************
此更新包包括以下生产级系统软件
更新:
系统 BIOS - R01.03.0021
ME 固件 - 03.01.03.030.0
BMC 固件 - 01.15.11288
FRUSDR - 1.30
--- 支持的产品---
英特尔® 服务器主板 S7200AP 和 S7200APR 产品系列
联系英特尔 了解生产硬件支持 要求
重要说明:
- 在安装之前,请阅读 BIOS 发行笔记.txt 文档,并密切关注此特定版本的重要注意事项和已知问题。
- 此统一固件包支持 S7200AP 和 S7200APR 板和计算模块产品。还支持所有关联的英特尔® 至强 Phi™ x200(以前是 KNL)或 X205(以前 NM)CPU。
- 此软件包中提供的所有更新仅使用嵌入式 uEFI 操作环境安装。
- 不要修改任何脚本文件。编写的脚本将提供最可靠的更新体验。
- 如果出于任何原因,在执行初始更新后需要重新安装系统 BIOS、BMC 固件或 FRU 和 SDR 数据,则软件包会
包括可单独运行的独立脚本文件。这些文件包括:启动。NSH,上升BIOS.NSH,上升ME.NSH,上升FD.NSH,上升BMC.NSH,和上升FRUSDR.NSH。
注意:请勿使用个人。NSH 更新文件,直到系统最初使用启动更新系统。NSH 文件。
注:使用 BMC 更新 BMC 固件时。NSH 更新脚本文件,此版本中的 BMC 闪存和 BIOS USB 驱动程序之间存在交互
这可能导致随机字符(通常是字母"e")在 BMC 更新完成后出现在命令行中。BMC 闪存后重新启动
将清除此错误。
*****************************************************************
系统软件 要求
*****************************************************************
S7200AP 产品系列
- S7200AP 基板 PBA 以 -304 及更高结尾。
-英特尔® 至强Phi™x200(以前的KNL)的生产版本,高达230W TDP。
- 系统 BIOS- R01.02.0001 或更高
- BMC 固件 - 版本 01.00.10304 或更高版本
S7200APR 产品系列
- S7200APR 基板 PBA 以 -250 及更高结束。
- 生产版英特尔® 至强 Phi™ x200(以前是 KNL)和英特尔® 至强 Phi™ x205( 以前 KNM) 处理器,高达 320W TDP。
- 系统 BIOS- R01.03.0001 或更高
- BMC 固件 - 版本 01.09.10985 或更高版本
- 前面板、热插拔背板和底板 FRU 数据必须可用,才能成功进行机箱自动检测。
*****************************************************************
更新过程
*****************************************************************
- 解压缩更新包的内容,并将所有文件复制到 USB 闪存驱动器上的根目录
- 将 USB 闪存驱动器插入服务器系统上要更新的任何可用 USB 端口。
- 打开服务器电源
- 系统将自动访问 uEFI 外壳并开始更新过程。
或
- 如果文件复制到根目录以外的文件夹,则将服务器引导到 uEFI 外壳。这可以通过开机自检期间的
- 在 uEFI 外壳中运行命令"map-r"以安装 USB 闪存驱动器
- 运行命令"fs0:"将文件夹更改为 USB 闪存驱动器。USB 闪存驱动器也可能安装到 fs1:具体取决于其他已安装的设备。"fs_"的数量取决于命令"map-r"的结果
- 将文件夹更改为包含更新包文件的文件夹,并手动启动"Startup.nsh"脚本文件以开始加载所有更新。
- 更新过程成功完成后重新启动系统
咨询说明:
每当系统 BIOS 更新时,都会安装两个 BIOS 映像,一个
映像和备份映像。备份映像在第一次系统重新启动期间加载
更新主 BIOS 映像后。在第一次系统重新启动期间,
屏幕将空白约 2 分钟,而备份 BIOS 图像
正在加载。在此期间,请勿关闭或重新启动系统。
当备份 BIOS 映像更新时,屏幕上将显示一条消息
完成。
验证更新:
- 在 POST 期间,在提示访问 BIOS 设置实用程序时,点击
- 从 BIOS 设置实用程序主菜单中,点击
- 在主菜单中验证 BIOS 修订是否正确
- 将光标移到服务器管理菜单
- 将光标向下移动到系统信息选项,然后点击"输入"
- 验证 BMC 固件版本是否正确
- 验证 SDR 修订是否正确
- 验证 ME 固件版本是否正确
- 配置所需的 BIOS 选项设置
- 点击 F10 键以保存更改并退出
系统软件 已完成。
警告: |
!!在更新过程中,请勿中断或重新启动或从系统断电。
这样做可能会使系统无法运行。!!
!!加载到系统后,请勿尝试向下 更新系统软件。
这样做可能会使系统无法运行。!!
您下载的任何软件中携带的软件许可协议条款控制您对软件的使用。
IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING.
Do not use or load this software and any associated materials (collectively,
the "Software") until you have carefully read the following terms and
conditions. By loading or using the Software, you agree to the terms of this
Agreement. If you do not wish to so agree, do not install or use the Software.
LICENSES: Please Note:
- If you are a network administrator, the "Site License" below shall
apply to you.
- If you are an end user, the "Single User License" shall apply to you.
- If you are an original equipment manufacturer (OEM), the "OEM License"
shall apply to you.
SITE LICENSE. You may copy the Software onto your organization's computers
for your organization's use, and you may make a reasonable number of
back-up copies of the Software, subject to these conditions:
1. This Software is licensed for use only in conjunction with Intel
component products. Use of the Software in conjunction with non-Intel
component products is not licensed hereunder.
2. You may not copy, modify, rent, sell, distribute or transfer any part
of the Software except as provided in this Agreement, and you agree to
prevent unauthorized copying of the Software.
3. You may not reverse engineer, decompile, or disassemble the Software.
4. You may not sublicense or permit simultaneous use of the Software by
more than one user.
5. The Software may include portions offered on terms in addition to those
set out here, as set out in a license accompanying those portions.
SINGLE USER LICENSE. You may copy the Software onto a single computer for
your personal, noncommercial use, and you may make one back-up copy of the
Software, subject to these conditions:
1. This Software is licensed for use only in conjunction with Intel
component products. Use of the Software in conjunction with non-Intel
component products is not licensed hereunder.
2. You may not copy, modify, rent, sell, distribute or transfer any part
of the Software except as provided in this Agreement, and you agree to
prevent unauthorized copying of the Software.
3. You may not reverse engineer, decompile, or disassemble the Software.
4. You may not sublicense or permit simultaneous use of the Software by
more than one user.
5. The Software may include portions offered on terms in addition to those
set out here, as set out in a license accompanying those portions.
OEM LICENSE: You may reproduce and distribute the Software only as an
integral part of or incorporated in Your product or as a standalone
Software maintenance update for existing end users of Your products,
excluding any other standalone products, subject to these conditions:
1. This Software is licensed for use only in conjunction with Intel
component products. Use of the Software in conjunction with non-Intel
component products is not licensed hereunder.
2. You may not copy, modify, rent, sell, distribute or transfer any part
of the Software except as provided in this Agreement, and you agree to
prevent unauthorized copying of the Software.
3. You may not reverse engineer, decompile, or disassemble the Software.
4. You may only distribute the Software to your customers pursuant to a
written license agreement. Such license agreement may be a "break-the-
seal" license agreement. At a minimum such license shall safeguard
Intel's ownership rights to the Software.
5. The Software may include portions offered on terms in addition to those
set out here, as set out in a license accompanying those portions.
NO OTHER RIGHTS. No rights or licenses are granted by Intel to You, expressly
or by implication, with respect to any proprietary information or patent,
copyright, mask work, trademark, trade secret, or other intellectual property
right owned or controlled by Intel, except as expressly provided in this
Agreement.
OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Software
remains with Intel or its suppliers. The Software is copyrighted and
protected by the laws of the United States and other countries, and
international treaty provisions. You may not remove any copyright notices
from the Software. Intel may make changes to the Software, or to items
referenced therein, at any time without notice, but is not obligated to
support or update the Software. Except as otherwise expressly provided, Intel
grants no express or implied right under Intel patents, copyrights,
trademarks, or other intellectual property rights. You may transfer the
Software only if the recipient agrees to be fully bound by these terms and if
you retain no copies of the Software.
LIMITED MEDIA WARRANTY. If the Software has been delivered by Intel on
physical media, Intel warrants the media to be free from material physical
defects for a period of ninety days after delivery by Intel. If such a defect
is found, return the media to Intel for replacement or alternate delivery of
the Software as Intel may select.
EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE, THE SOFTWARE IS
PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED WARRANTY OF ANY KIND
INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, OR FITNESS FOR A
PARTICULAR PURPOSE. Intel does not warrant or assume responsibility for the
accuracy or completeness of any information, text, graphics, links or other
items contained within the Software.
LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS SUPPLIERS BE LIABLE
FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, LOST PROFITS,
BUSINESS INTERRUPTION, OR LOST INFORMATION) ARISING OUT OF THE USE OF OR
INABILITY TO USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT EXCLUSION OR
LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES OR CONSEQUENTIAL OR INCIDENTAL
DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE
OTHER LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION.
TERMINATION OF THIS AGREEMENT. Intel may terminate this Agreement at any time
if you violate its terms. Upon termination, you will immediately destroy the
Software or return all copies of the Software to Intel.
APPLICABLE LAWS. Claims arising under this Agreement shall be governed by the
laws of California, excluding its principles of conflict of laws and the
United Nations Convention on Contracts for the Sale of Goods. You may not
export the Software in violation of applicable export laws and regulations.
Intel is not obligated under any other agreements unless they are in writing
and signed by an authorized representative of Intel.
GOVERNMENT RESTRICTED RIGHTS. The Software is provided with "RESTRICTED
RIGHTS." Use, duplication, or disclosure by the Government is subject to
restrictions as set forth in FAR52.227-14 and DFAR252.227-7013 et seq. or its
successor. Use of the Software by the Government constitutes acknowledgment
of Intel's proprietary rights therein. Contractor or Manufacturer is Intel
2200 Mission College Blvd., Santa Clara, CA 95052.
我们的目标是使下载中心成为您的一个有价值的资源。请在此处提交您的意见、问题或建议。
需要获得对英特尔® 产品的帮助吗?联系支持人员
您的个人信息将仅用于对此查询作出回应。您的姓名和电子邮件地址将不会添加到任何邮寄列表中;您也不会在未经请求的情况下收到来自英特尔公司的电子邮件。单击“提交”即确认您接受英特尔的使用条款,并了解英特尔的隐私策略。