英特尔®数据迁移软件

版本: 3.2 (先前发行的) 日期: 2018/7/10

可供下载

IDMS_12640.zip

Windows 10*
Windows* 8.1
Windows 8*
Windows 7*
Windows Vista*

英语

445.23 MB

fac479eee193b93eb9cf558471974e62

下载

其他版本

详细描述

 

英特尔®数据迁移软件(DMS)将驱动器的内容从旧存储设备复制到新的英特尔®固态盘(英特尔® SSD)。

使用英特尔数据迁移软件之前,请查看《数据迁移软件用户指南》以了解有关过程和系统的要求。数据迁移软件要求至少有一个英特尔固态盘连接到系统。
安装英特尔®固态盘和英特尔数据迁移软件后,软件将检测旧硬盘和新驱动器,并引导您完成克隆过程,showomg 如何将您的所有数据从旧驱动器移动到较新的固态盘。开始之前,请确保旧驱动器上的数据量不超过新固态盘的大小。

英特尔固态盘经销商或零售包装箱中包含的内容

-英特尔固态盘(所有型号)
-用于将存储设备连接到台式机的 SATA 到 SATA 电缆
计算机(仅限 K5 型号)
-2.5 "至 3.5" 安装支架,用于将您的 2.5 "固态盘" 装入 3.5 "
您的台式机中的外壳(仅限 R5 和 K5 机型)
-下载英特尔数据迁移软件的链接

您需要的内容

-具有所需系统规格的计算机(见下文)
-一把螺丝刀 ~ 3 毫米
-如果您是在笔记本电脑上安装,则是第三方 SATA 到 USB 电缆
可能需要适配器。**

* * 注意:一些第三方电缆或适配器工作(USB 到 SATA,USB 到 M),但重要的是,电缆或适配器将正确的型号字符串导出到操作系统。如果英特尔数据迁移软件未收到正确的型号字符串,它将无法在操作系统中检测到驱动器,也无法进行安装。电缆或适配器必须供电才能运行驱动器。无需电源,驱动器将离线,克隆会失败。

所需的系统规格

英特尔数据迁移软件的硬件要求与安装在英特尔数据迁移软件的计算机上安装的操作系统的最低要求相一致。此外,英特尔数据迁移软件需要以下硬件:
-连接的英特尔固态盘

英特尔数据迁移软件修复介质具有以下硬件要求:
-1GB RAM
-处理器 1 GHz 或更快
-建议的最小屏幕分辨率为1152x720
-支持的操作系统是 Microsoft Windows Vista *、Windows 7 *、Windows 8 *、Windows 8.1 * 和 Windows®10。

英特尔数据迁移软件与 Macintosh 计算机不兼容。如果您使用的是 Mac * 操作系统,则有多种免费工具可用于克隆,例如碳 Copy Cloner,如下所示:http://www.bombich.com/

您的英特尔固态盘附带有关在系统中物理安装驱动器的说明。请参考这些说明。

英特尔固态盘升级套件(仅适用于 K5 型号)附带了专为在台式机上迁移数据而设计的电缆。如果您使用的是笔记本电脑或上网本,您可以购买第三方硬件接口来迁移您的数据。

英特尔数据迁移软件采用以下语言:
英语、日语、韩语、简体中文和繁体中文、巴西葡萄牙语、西班牙语、法语、意大利语、德语、波兰语和俄语

安装数据迁移软件后,可在 "帮助" 菜单中更改该语言。

此信息是对原始内容进行机器翻译和人工翻译的结果,仅为您的便利而提供。此内容仅提供用于一般参考,不应将其作为完整或准确的信息予以依赖。

发行说明

此下载包对下面列出的产品有效。

英特尔软件许可协议

X

您下载的任何软件中携带的软件许可协议条款控制您对软件的使用。

INTEL SOFTWARE LICENSE AGREEMENT

IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING.

Do not use or load this software and any associated materials (collectively,

the "Software") until you have carefully read the following terms and

conditions. By loading or using the Software, you agree to the terms of this

Agreement. If you do not wish to so agree, do not install or use the Software.

LICENSES: Please Note:

- If you are a network administrator, the "Site License" below shall

apply to you.

- If you are an end user, the "Single User License" shall apply to you.

- If you are an original equipment manufacturer (OEM), the "OEM License"

shall apply to you.

SITE LICENSE. You may copy the Software onto your organization's computers

for your organization's use, and you may make a reasonable number of

back-up copies of the Software, subject to these conditions:

1. This Software is licensed for use only in conjunction with Intel

component products. Use of the Software in conjunction with non-Intel

component products is not licensed hereunder.

2. You may not copy, modify, rent, sell, distribute or transfer any part

of the Software except as provided in this Agreement, and you agree to

prevent unauthorized copying of the Software.

3. You may not reverse engineer, decompile, or disassemble the Software.

4. You may not sublicense or permit simultaneous use of the Software by

more than one user.

5. The Software may include portions offered on terms in addition to those

set out here, as set out in a license accompanying those portions.

SINGLE USER LICENSE. You may copy the Software onto a single computer for

your personal, noncommercial use, and you may make one back-up copy of the

Software, subject to these conditions:

1. This Software is licensed for use only in conjunction with Intel

component products. Use of the Software in conjunction with non-Intel

component products is not licensed hereunder.

2. You may not copy, modify, rent, sell, distribute or transfer any part

of the Software except as provided in this Agreement, and you agree to

prevent unauthorized copying of the Software.

3. You may not reverse engineer, decompile, or disassemble the Software.

4. You may not sublicense or permit simultaneous use of the Software by

more than one user.

5. The Software may include portions offered on terms in addition to those

set out here, as set out in a license accompanying those portions.

OEM LICENSE: You may reproduce and distribute the Software only as an

integral part of or incorporated in Your product or as a standalone

Software maintenance update for existing end users of Your products,

excluding any other standalone products, subject to these conditions:

1. This Software is licensed for use only in conjunction with Intel

component products. Use of the Software in conjunction with non-Intel

component products is not licensed hereunder.

2. You may not copy, modify, rent, sell, distribute or transfer any part

of the Software except as provided in this Agreement, and you agree to

prevent unauthorized copying of the Software.

3. You may not reverse engineer, decompile, or disassemble the Software.

4. You may only distribute the Software to your customers pursuant to a

written license agreement. Such license agreement may be a "break-the-

seal" license agreement. At a minimum such license shall safeguard

Intel's ownership rights to the Software.

5. The Software may include portions offered on terms in addition to those

set out here, as set out in a license accompanying those portions.

NO OTHER RIGHTS. No rights or licenses are granted by Intel to You, expressly

or by implication, with respect to any proprietary information or patent,

copyright, mask work, trademark, trade secret, or other intellectual property

right owned or controlled by Intel, except as expressly provided in this

Agreement.

OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Software

remains with Intel or its suppliers. The Software is copyrighted and

protected by the laws of the United States and other countries, and

international treaty provisions. You may not remove any copyright notices

from the Software. Intel may make changes to the Software, or to items

referenced therein, at any time without notice, but is not obligated to

support or update the Software. Except as otherwise expressly provided, Intel

grants no express or implied right under Intel patents, copyrights,

trademarks, or other intellectual property rights. You may transfer the

Software only if the recipient agrees to be fully bound by these terms and if

you retain no copies of the Software.

LIMITED MEDIA WARRANTY. If the Software has been delivered by Intel on

physical media, Intel warrants the media to be free from material physical

defects for a period of ninety days after delivery by Intel. If such a defect

is found, return the media to Intel for replacement or alternate delivery of

the Software as Intel may select.

EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE, THE SOFTWARE IS

PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED WARRANTY OF ANY KIND

INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, OR FITNESS FOR A

PARTICULAR PURPOSE. Intel does not warrant or assume responsibility for the

accuracy or completeness of any information, text, graphics, links or other

items contained within the Software.

LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS SUPPLIERS BE LIABLE

FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, LOST PROFITS,

BUSINESS INTERRUPTION, OR LOST INFORMATION) ARISING OUT OF THE USE OF OR

INABILITY TO USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT EXCLUSION OR

LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES OR CONSEQUENTIAL OR INCIDENTAL

DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE

OTHER LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION.

TERMINATION OF THIS AGREEMENT. Intel may terminate this Agreement at any time

if you violate its terms. Upon termination, you will immediately destroy the

Software or return all copies of the Software to Intel.

APPLICABLE LAWS. Claims arising under this Agreement shall be governed by the

laws of California, excluding its principles of conflict of laws and the

United Nations Convention on Contracts for the Sale of Goods. You may not

export the Software in violation of applicable export laws and regulations.

Intel is not obligated under any other agreements unless they are in writing

and signed by an authorized representative of Intel.

GOVERNMENT RESTRICTED RIGHTS. The Software is provided with "RESTRICTED

RIGHTS." Use, duplication, or disclosure by the Government is subject to

restrictions as set forth in FAR52.227-14 and DFAR252.227-7013 et seq. or its

successor. Use of the Software by the Government constitutes acknowledgment

of Intel's proprietary rights therein. Contractor or Manufacturer is Intel

2200 Mission College Blvd., Santa Clara, CA 95052.

我接受许可协议中的条款

我不接受许可协议中的条款

支持产品亮点,特色内容,更多。

产品支持

支持产品亮点,特色内容,更多。

产品规格

产品规格

您需要的信息均在您的指间。

提供反馈

我们的目标是使下载中心成为您的一个有价值的资源。请在此处提交您的意见、问题或建议。

需要获得对英特尔® 产品的帮助吗?联系支持人员

您是否觉得此网站上的信息很有用?

您的个人信息将仅用于对此查询作出回应。您的姓名和电子邮件地址将不会添加到任何邮寄列表中;您也不会在未经请求的情况下收到来自英特尔公司的电子邮件。单击“提交”即确认您接受英特尔的使用条款,并了解英特尔的隐私策略。