비휘발성 메모리(NVM) 업데이트 유틸리티인텔® Ethernet 네트워크 어댑터 E810 시리즈—FreeBSD*

버전: 2.02 (사전 출시품) 날짜: 2020-07-24

사용 가능한 다운로드

E810_NVMUpdatePackage_v2_02_FreeBSD.tar.gz

FreeBSD*

영어

15.31 MB

56f051c274a35df4866e1988a280e54e

다운로드

기타 버전

상세한 설명

변경 공지, 2020년 9월 17일:

NVM 업데이트 패키지 2.02가 업데이트되었습니다. 현재 2.02 업데이트 패키지가 설치되어 있으며 변경 공지의 결과로 이 업데이트 패키지를 다시 실행하고 있는 경우: 업그레이드 또는 다운그레이드를 수행하면서 표시된 펌웨어 버전(NVM 업그레이드/다운그레이드 프로세스 디스플레이 화면에서 볼 수)은 변경되지 않은 상태로 유지됩니다. 보고된 버전은 2.00(C0) 또는 2.02(B0)입니다. 업그레이드 또는 다운그레이드가 작동 중이지만 표시된 버전 번호에서 변경이 보이지 않습니다.

업데이트된 사항:

한 NVM 이미지가 NVM 업데이트 패키지 2.02에서 교체되어 영향을 받는 제품에 대해 이 패키지에 대한 향후 다운그레이빙이 가능해 습니다. 이 변경이 없이도 이 패키지의 향후 다운그레디드가 영향을 받는 제품에 영향을 미치지 않을 수 있습니다.

영향을 받는 제품:

다음 제품이 영향을 받습니다.

NVM 이미지는 다음 실리콘 제품과 함께 ETrack ID 0x80003E45를 사용하여 8x10G SFP 모드를 사용하여 OEM 설계에 대해 수정된 것입니다.

  • 인텔® Ethernet Controller E810-CAM2, MM# 999W9F, 트레이
  • 인텔® Ethernet Controller E810-CAM2, MM# 999W9G, 테이프 및 릴

기타 정보:

위에 나열된 영향을 받는 제품을 사용하는 경우, 2.02로 다시 다운그레이드를 시도하기 전에 새로운 NVM 패키지 파일로 업데이트하는 것이 좋습니다. 업그레이드만 진행하는 경우 패키지를 교체할 필요가 없습니다. 다른 모든 파일은 그대로 유지됩니다. 다른 제품에는 영향을 끼치지 않습니다.

개요

이 패키지에는 시스템의 드라이브 E810의 비휘발성 메모리(NVM) 업데이트에 인텔® Ethernet Adapter 모든 파일이 포함되어 있습니다. NVM 업데이트 유틸리티, 구성 파일, 업데이트된 NVM binaries 및 필수 드라이버 파일이 포함되어 있습니다.

설치 지침, 제한 사항 및 구성 사항 및 기타 세부 정보와 같은 자세한 내용은 포함된 readme 파일을 참조하십시오.

이 정보는 편의를 위해 원래 컨텐츠를 번역사가 번역한 것과 컴퓨터가 번역한 것을 조합해서 제공하는 것입니다. 이 컨텐츠는 일반적인 정보 제공 용도로만 제공되는 것으로, 완전하거나 정확한 것으로 간주해서는 안 됩니다.

다운로드 설명서

이 다운로드는 아래 나온 제품에 적용할 수 있습니다.

인텔 소프트웨어 사용권 계약

X

소프트웨어에 포함된 소프트웨어 사용권 계약 조항에 따라 소프트웨어를 사용해야 합니다.

INTEL SOFTWARE LICENSE AGREEMENT

IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING.

Do not use or load this software and any associated materials (collectively,

the "Software") until you have carefully read the following terms and

conditions. By loading or using the Software, you agree to the terms of this

Agreement. If you do not wish to so agree, do not install or use the Software.

LICENSES: Please Note:

- If you are a network administrator, the "Site License" below shall

apply to you.

- If you are an end user, the "Single User License" shall apply to you.

- If you are an original equipment manufacturer (OEM), the "OEM License"

shall apply to you.

SITE LICENSE. You may copy the Software onto your organization's computers

for your organization's use, and you may make a reasonable number of

back-up copies of the Software, subject to these conditions:

1. This Software is licensed for use only in conjunction with Intel

component products. Use of the Software in conjunction with non-Intel

component products is not licensed hereunder.

2. You may not copy, modify, rent, sell, distribute or transfer any part

of the Software except as provided in this Agreement, and you agree to

prevent unauthorized copying of the Software.

3. You may not reverse engineer, decompile, or disassemble the Software.

4. You may not sublicense or permit simultaneous use of the Software by

more than one user.

5. The Software may include portions offered on terms in addition to those

set out here, as set out in a license accompanying those portions.

SINGLE USER LICENSE. You may copy the Software onto a single computer for

your personal, noncommercial use, and you may make one back-up copy of the

Software, subject to these conditions:

1. This Software is licensed for use only in conjunction with Intel

component products. Use of the Software in conjunction with non-Intel

component products is not licensed hereunder.

2. You may not copy, modify, rent, sell, distribute or transfer any part

of the Software except as provided in this Agreement, and you agree to

prevent unauthorized copying of the Software.

3. You may not reverse engineer, decompile, or disassemble the Software.

4. You may not sublicense or permit simultaneous use of the Software by

more than one user.

5. The Software may include portions offered on terms in addition to those

set out here, as set out in a license accompanying those portions.

OEM LICENSE: You may reproduce and distribute the Software only as an

integral part of or incorporated in Your product or as a standalone

Software maintenance update for existing end users of Your products,

excluding any other standalone products, subject to these conditions:

1. This Software is licensed for use only in conjunction with Intel

component products. Use of the Software in conjunction with non-Intel

component products is not licensed hereunder.

2. You may not copy, modify, rent, sell, distribute or transfer any part

of the Software except as provided in this Agreement, and you agree to

prevent unauthorized copying of the Software.

3. You may not reverse engineer, decompile, or disassemble the Software.

4. You may only distribute the Software to your customers pursuant to a

written license agreement. Such license agreement may be a "break-the-

seal" license agreement. At a minimum such license shall safeguard

Intel's ownership rights to the Software.

5. The Software may include portions offered on terms in addition to those

set out here, as set out in a license accompanying those portions.

NO OTHER RIGHTS. No rights or licenses are granted by Intel to You, expressly

or by implication, with respect to any proprietary information or patent,

copyright, mask work, trademark, trade secret, or other intellectual property

right owned or controlled by Intel, except as expressly provided in this

Agreement.

OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Software

remains with Intel or its suppliers. The Software is copyrighted and

protected by the laws of the United States and other countries, and

international treaty provisions. You may not remove any copyright notices

from the Software. Intel may make changes to the Software, or to items

referenced therein, at any time without notice, but is not obligated to

support or update the Software. Except as otherwise expressly provided, Intel

grants no express or implied right under Intel patents, copyrights,

trademarks, or other intellectual property rights. You may transfer the

Software only if the recipient agrees to be fully bound by these terms and if

you retain no copies of the Software.

LIMITED MEDIA WARRANTY. If the Software has been delivered by Intel on

physical media, Intel warrants the media to be free from material physical

defects for a period of ninety days after delivery by Intel. If such a defect

is found, return the media to Intel for replacement or alternate delivery of

the Software as Intel may select.

EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE, THE SOFTWARE IS

PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED WARRANTY OF ANY KIND

INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, OR FITNESS FOR A

PARTICULAR PURPOSE. Intel does not warrant or assume responsibility for the

accuracy or completeness of any information, text, graphics, links or other

items contained within the Software.

LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS SUPPLIERS BE LIABLE

FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, LOST PROFITS,

BUSINESS INTERRUPTION, OR LOST INFORMATION) ARISING OUT OF THE USE OF OR

INABILITY TO USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT EXCLUSION OR

LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES OR CONSEQUENTIAL OR INCIDENTAL

DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE

OTHER LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION.

TERMINATION OF THIS AGREEMENT. Intel may terminate this Agreement at any time

if you violate its terms. Upon termination, you will immediately destroy the

Software or return all copies of the Software to Intel.

APPLICABLE LAWS. Claims arising under this Agreement shall be governed by the

laws of California, excluding its principles of conflict of laws and the

United Nations Convention on Contracts for the Sale of Goods. You may not

export the Software in violation of applicable export laws and regulations.

Intel is not obligated under any other agreements unless they are in writing

and signed by an authorized representative of Intel.

GOVERNMENT RESTRICTED RIGHTS. The Software is provided with "RESTRICTED

RIGHTS." Use, duplication, or disclosure by the Government is subject to

restrictions as set forth in FAR52.227-14 and DFAR252.227-7013 et seq. or its

successor. Use of the Software by the Government constitutes acknowledgment

of Intel's proprietary rights therein. Contractor or Manufacturer is Intel

2200 Mission College Blvd., Santa Clara, CA 95052.

사용권 계약에 동의합니다

사용권 계약에 동의하지 않습니다

피드백

인텔에서는 다운로드 센터가 유용한 리소스로 활용될 수 있도록 지속적으로 개선하고 있습니다. 의견이나 질문 또는 제안 사항이 있으면 이곳에서 제출해 주십시오.

인텔® 제품과 관련하여 도움이 필요하십니까? 지원팀 연락 방법

이 사이트의 정보가 유용했습니까?

개인 정보는 이 질의에 응답하기 위한 용도로만 사용됩니다. 이름과 이메일 주소는 메일 목록에 추가되지 않으며 요청이 있지 않는 한 인텔사로부터 이메일을 받지 않습니다. ‘제출’을 클릭하면 인텔 이용 약관을 수락하고 인텔 개인 정보 보호 정책을 이해했다는 데 동의한 것으로 간주합니다.