인텔® 이더넷 어댑터 700 시리즈-Windows*

버전: 6.80 (사전 출시품) 날짜: 2019-03-18

사용 가능한 다운로드

XL710_NVMUpdatePackage_v6_80_Windows.exe

OS 독립적
Windows 10*
Windows* 8.1
Windows 8*
Windows 7*
Windows Server 2016*
Windows* Server 2012 R2
Windows Server 2012*
Windows Server 2008 R2*
Windows Server 2008*

영어

36.36 MB

4f4d5e6a056308428e0d1e1ec7c58342

다운로드

기타 버전

상세한 설명

개요

이 패키지에는 시스템의 인텔® 이더넷 어댑터에서 NVM(비휘발성 메모리)을 업데이트하는 데 필요한 모든 파일이 포함되어 있습니다. 여기에는 NVM 업데이트 유틸리티, 구성 파일, 업데이트된 NVM 바이너리 및 필수 드라이버 파일이 포함되어 있습니다.

버전 6.80에 대한 NVM 업데이트와 릴리스 23.4에는 복구 모드가 포함되어 있습니다.

참고: NVM 6.01은 23.4 SW 릴리즈와 함께 사용할 수 있습니다.

설치는 일반적인 업그레이드 설치 절차를 사용합니다.

  • 일반 NVM 업그레이드(인텔® 이더넷 NVM 업데이트 도구)를 사용하여 새로운 기능을 활성화할 수 있습니다.
  • 재부팅이 필요합니다. 이전에 릴리스된 버전에서 업데이트할 때 A/C 전원 주기가 필요하지 않습니다. 인텔 NVM 업데이트 도구와 함께 제공된 지침을 따르는 것이 좋습니다.
  • 버전 x.x로 NVM 업데이트를 사용하면 롤백 방지 모드가 활성화됩니다. 업그레이드 후에는 이전 NVM 버전으로 다운그레이드할 수 없습니다.

참고: 복구 모드의 디자인은 이전 버전의 NVM으로 롤백을 배제합니다. 복구 모드 기능이 추가되면서 NVM의 일부 영역의 정의가 쓰기 보호로 변경되기 때문입니다. 이전 버전으로 롤백하려면 이러한 쓰기 보호 영역에 액세스해야 하므로 롤백이 실패합니다.

  • 복구 모드는 정상 작동에 영향을 미치지 않습니다.
  • 복구 모드를 완전히 지원하려면 릴리스 23.4 이상에서 업데이트된 이더넷 NVM, 소프트웨어 드라이버 및 소프트웨어 도구를 모두 사용해야 합니다.

제한 및 필수 구성 조건, UEFI 요구 사항 및 스크립트 사용 방법과 같은 자세한 내용은 readme 파일을 참조하십시오.

관련 주제

이 정보는 편의를 위해 원래 컨텐츠를 번역사가 번역한 것과 컴퓨터가 번역한 것을 조합해서 제공하는 것입니다. 이 컨텐츠는 일반적인 정보 제공 용도로만 제공되는 것으로, 완전하거나 정확한 것으로 간주해서는 안 됩니다.

출시 정보

이 다운로드는 아래 나온 제품에 적용할 수 있습니다.

인텔 소프트웨어 사용권 계약

X

소프트웨어에 포함된 소프트웨어 사용권 계약 조항에 따라 소프트웨어를 사용해야 합니다.

INTEL SOFTWARE LICENSE AGREEMENT

IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING.

Do not use or load this software and any associated materials (collectively,

the "Software") until you have carefully read the following terms and

conditions. By loading or using the Software, you agree to the terms of this

Agreement. If you do not wish to so agree, do not install or use the Software.

LICENSES: Please Note:

- If you are a network administrator, the "Site License" below shall

apply to you.

- If you are an end user, the "Single User License" shall apply to you.

- If you are an original equipment manufacturer (OEM), the "OEM License"

shall apply to you.

SITE LICENSE. You may copy the Software onto your organization's computers

for your organization's use, and you may make a reasonable number of

back-up copies of the Software, subject to these conditions:

1. This Software is licensed for use only in conjunction with Intel

component products. Use of the Software in conjunction with non-Intel

component products is not licensed hereunder.

2. You may not copy, modify, rent, sell, distribute or transfer any part

of the Software except as provided in this Agreement, and you agree to

prevent unauthorized copying of the Software.

3. You may not reverse engineer, decompile, or disassemble the Software.

4. You may not sublicense or permit simultaneous use of the Software by

more than one user.

5. The Software may include portions offered on terms in addition to those

set out here, as set out in a license accompanying those portions.

SINGLE USER LICENSE. You may copy the Software onto a single computer for

your personal, noncommercial use, and you may make one back-up copy of the

Software, subject to these conditions:

1. This Software is licensed for use only in conjunction with Intel

component products. Use of the Software in conjunction with non-Intel

component products is not licensed hereunder.

2. You may not copy, modify, rent, sell, distribute or transfer any part

of the Software except as provided in this Agreement, and you agree to

prevent unauthorized copying of the Software.

3. You may not reverse engineer, decompile, or disassemble the Software.

4. You may not sublicense or permit simultaneous use of the Software by

more than one user.

5. The Software may include portions offered on terms in addition to those

set out here, as set out in a license accompanying those portions.

OEM LICENSE: You may reproduce and distribute the Software only as an

integral part of or incorporated in Your product or as a standalone

Software maintenance update for existing end users of Your products,

excluding any other standalone products, subject to these conditions:

1. This Software is licensed for use only in conjunction with Intel

component products. Use of the Software in conjunction with non-Intel

component products is not licensed hereunder.

2. You may not copy, modify, rent, sell, distribute or transfer any part

of the Software except as provided in this Agreement, and you agree to

prevent unauthorized copying of the Software.

3. You may not reverse engineer, decompile, or disassemble the Software.

4. You may only distribute the Software to your customers pursuant to a

written license agreement. Such license agreement may be a "break-the-

seal" license agreement. At a minimum such license shall safeguard

Intel's ownership rights to the Software.

5. The Software may include portions offered on terms in addition to those

set out here, as set out in a license accompanying those portions.

NO OTHER RIGHTS. No rights or licenses are granted by Intel to You, expressly

or by implication, with respect to any proprietary information or patent,

copyright, mask work, trademark, trade secret, or other intellectual property

right owned or controlled by Intel, except as expressly provided in this

Agreement.

OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Software

remains with Intel or its suppliers. The Software is copyrighted and

protected by the laws of the United States and other countries, and

international treaty provisions. You may not remove any copyright notices

from the Software. Intel may make changes to the Software, or to items

referenced therein, at any time without notice, but is not obligated to

support or update the Software. Except as otherwise expressly provided, Intel

grants no express or implied right under Intel patents, copyrights,

trademarks, or other intellectual property rights. You may transfer the

Software only if the recipient agrees to be fully bound by these terms and if

you retain no copies of the Software.

LIMITED MEDIA WARRANTY. If the Software has been delivered by Intel on

physical media, Intel warrants the media to be free from material physical

defects for a period of ninety days after delivery by Intel. If such a defect

is found, return the media to Intel for replacement or alternate delivery of

the Software as Intel may select.

EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE, THE SOFTWARE IS

PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED WARRANTY OF ANY KIND

INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, OR FITNESS FOR A

PARTICULAR PURPOSE. Intel does not warrant or assume responsibility for the

accuracy or completeness of any information, text, graphics, links or other

items contained within the Software.

LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS SUPPLIERS BE LIABLE

FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, LOST PROFITS,

BUSINESS INTERRUPTION, OR LOST INFORMATION) ARISING OUT OF THE USE OF OR

INABILITY TO USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT EXCLUSION OR

LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES OR CONSEQUENTIAL OR INCIDENTAL

DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE

OTHER LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION.

TERMINATION OF THIS AGREEMENT. Intel may terminate this Agreement at any time

if you violate its terms. Upon termination, you will immediately destroy the

Software or return all copies of the Software to Intel.

APPLICABLE LAWS. Claims arising under this Agreement shall be governed by the

laws of California, excluding its principles of conflict of laws and the

United Nations Convention on Contracts for the Sale of Goods. You may not

export the Software in violation of applicable export laws and regulations.

Intel is not obligated under any other agreements unless they are in writing

and signed by an authorized representative of Intel.

GOVERNMENT RESTRICTED RIGHTS. The Software is provided with "RESTRICTED

RIGHTS." Use, duplication, or disclosure by the Government is subject to

restrictions as set forth in FAR52.227-14 and DFAR252.227-7013 et seq. or its

successor. Use of the Software by the Government constitutes acknowledgment

of Intel's proprietary rights therein. Contractor or Manufacturer is Intel

2200 Mission College Blvd., Santa Clara, CA 95052.

사용권 계약에 동의합니다

사용권 계약에 동의하지 않습니다

피드백

인텔에서는 다운로드 센터가 유용한 리소스로 활용될 수 있도록 지속적으로 개선하고 있습니다. 의견이나 질문 또는 제안 사항이 있으면 이곳에서 제출해 주십시오.

인텔® 제품과 관련하여 도움이 필요하십니까? 지원팀 연락 방법

이 사이트의 정보가 유용했습니까?

개인 정보는 이 질의에 응답하기 위한 용도로만 사용됩니다. 이름과 이메일 주소는 메일 목록에 추가되지 않으며 요청이 있지 않는 한 인텔사로부터 이메일을 받지 않습니다. ‘제출’을 클릭하면 인텔 이용 약관을 수락하고 인텔 개인 정보 보호 정책을 이해했다는 데 동의한 것으로 간주합니다.