UEFI 용 인텔® 서버 보드 S2600BP 제품군 BIOS 및 펌웨어 업데이트 패키지

버전: 02.01.0008 (사전 출시품) 날짜: 2019-05-15

사용 가능한 다운로드

S2600BP_EFI_BIOSR02010008_ME04.01.04.251_BMC1.93.870CF4F0_FRUSDR_1.39_DCPMM01.02.00.5346.zip

OS 독립적

영어

29.78 MB

f4cb3a28ccdc7fee2bc7463f1e00a443

다운로드

기타 버전

상세한 설명

의도적

이 업데이트 패키지는 인텔® 서버 보드 S2600BP 제품군을 위한 것입니다. 이 업데이트 패키지에는 다음과 같은 프로덕션 수준의 시스템 펌웨어 업데이트가 포함 되어 있습니다.

  • 시스템 BIOS: 02.01.0008
  • ME 펌웨어: 04.01.04.251
  • BMC 펌웨어: 1.93.870 cf4f0
  • FRUSDR: 1.39
  • DCPMM: 1.2.0.5346

이 업데이트를 실행 하려면 임베디드 UEFI 셸로 시스템을 부팅 하 고 아래 단계를 따르십시오.

  1. 시동 프로그램을 실행 하 여 BIOS, ME, BMC 및 FRUSDR을 업데이트 하십시오.
  2. DCPMM DIMM이 시스템에 설치 되어 있는 경우 1 단계를 완료 한 후 시스템을 재부팅 하 고 시동을 실행 합니다. nsh는 DCPMM 펌웨어를 업데이트 합니다.

펌웨어 업데이트 및 문제 해결 팁을 확인 하려면

시스템 하드웨어 및 펌웨어 요구 사항

시스템 펌웨어 스택을이 업데이트 패키지에 포함 된 버전으로 업데이트 하려면 시스템에 현재 로드 된 시스템 펌웨어 스택이 다음을 충족 해야 합니다.

  • 시스템 BIOS: 00.01.0016 이상
  • ME 펌웨어: 04.00.04.393 이상
  • BMC 펌웨어: 1.90.0 cf6e935 이상
  • FRUSDR: 1.39 이상

시스템이 현재 위의 시스템 펌웨어 요구 사항을 충족 하지 않을 경우, 시스템을 펌웨어 스택으로 업데이트 하기 전에 이전에 게시 한 시스템 업데이트 패키지 (SUP)를 다운로드 하 고 앞에서 설명한 펌웨어 개정판으로 시스템을 업데이트 해야 합니다. 이 패키지에 포함 됩니다.

이 패키지에는 BIOS 복구 파일이 포함 되어 있습니다. 이 패키지의 BIOS 릴리스 노트에서 BIOS 복구 지침을 참조 하십시오.

설치 지침, 지원 되는 하드웨어, 새로운 사항, 버그 픽스, 알려진 문제에 대 한 자세한 내용은 릴리스 노트 readme 파일을 참조 하십시오.

 

이 정보는 편의를 위해 원래 컨텐츠를 번역사가 번역한 것과 컴퓨터가 번역한 것을 조합해서 제공하는 것입니다. 이 컨텐츠는 일반적인 정보 제공 용도로만 제공되는 것으로, 완전하거나 정확한 것으로 간주해서는 안 됩니다.

출시 정보

이 다운로드는 아래 나온 제품에 적용할 수 있습니다.

인텔 소프트웨어 사용권 계약

X

소프트웨어에 포함된 소프트웨어 사용권 계약 조항에 따라 소프트웨어를 사용해야 합니다.

INTEL SOFTWARE LICENSE AGREEMENT

IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING.

Do not use or load this software and any associated materials (collectively,

the "Software") until you have carefully read the following terms and

conditions. By loading or using the Software, you agree to the terms of this

Agreement. If you do not wish to so agree, do not install or use the Software.

LICENSES: Please Note:

- If you are a network administrator, the "Site License" below shall

apply to you.

- If you are an end user, the "Single User License" shall apply to you.

- If you are an original equipment manufacturer (OEM), the "OEM License"

shall apply to you.

SITE LICENSE. You may copy the Software onto your organization's computers

for your organization's use, and you may make a reasonable number of

back-up copies of the Software, subject to these conditions:

1. This Software is licensed for use only in conjunction with Intel

component products. Use of the Software in conjunction with non-Intel

component products is not licensed hereunder.

2. You may not copy, modify, rent, sell, distribute or transfer any part

of the Software except as provided in this Agreement, and you agree to

prevent unauthorized copying of the Software.

3. You may not reverse engineer, decompile, or disassemble the Software.

4. You may not sublicense or permit simultaneous use of the Software by

more than one user.

5. The Software may include portions offered on terms in addition to those

set out here, as set out in a license accompanying those portions.

SINGLE USER LICENSE. You may copy the Software onto a single computer for

your personal, noncommercial use, and you may make one back-up copy of the

Software, subject to these conditions:

1. This Software is licensed for use only in conjunction with Intel

component products. Use of the Software in conjunction with non-Intel

component products is not licensed hereunder.

2. You may not copy, modify, rent, sell, distribute or transfer any part

of the Software except as provided in this Agreement, and you agree to

prevent unauthorized copying of the Software.

3. You may not reverse engineer, decompile, or disassemble the Software.

4. You may not sublicense or permit simultaneous use of the Software by

more than one user.

5. The Software may include portions offered on terms in addition to those

set out here, as set out in a license accompanying those portions.

OEM LICENSE: You may reproduce and distribute the Software only as an

integral part of or incorporated in Your product or as a standalone

Software maintenance update for existing end users of Your products,

excluding any other standalone products, subject to these conditions:

1. This Software is licensed for use only in conjunction with Intel

component products. Use of the Software in conjunction with non-Intel

component products is not licensed hereunder.

2. You may not copy, modify, rent, sell, distribute or transfer any part

of the Software except as provided in this Agreement, and you agree to

prevent unauthorized copying of the Software.

3. You may not reverse engineer, decompile, or disassemble the Software.

4. You may only distribute the Software to your customers pursuant to a

written license agreement. Such license agreement may be a "break-the-

seal" license agreement. At a minimum such license shall safeguard

Intel's ownership rights to the Software.

5. The Software may include portions offered on terms in addition to those

set out here, as set out in a license accompanying those portions.

NO OTHER RIGHTS. No rights or licenses are granted by Intel to You, expressly

or by implication, with respect to any proprietary information or patent,

copyright, mask work, trademark, trade secret, or other intellectual property

right owned or controlled by Intel, except as expressly provided in this

Agreement.

OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Software

remains with Intel or its suppliers. The Software is copyrighted and

protected by the laws of the United States and other countries, and

international treaty provisions. You may not remove any copyright notices

from the Software. Intel may make changes to the Software, or to items

referenced therein, at any time without notice, but is not obligated to

support or update the Software. Except as otherwise expressly provided, Intel

grants no express or implied right under Intel patents, copyrights,

trademarks, or other intellectual property rights. You may transfer the

Software only if the recipient agrees to be fully bound by these terms and if

you retain no copies of the Software.

LIMITED MEDIA WARRANTY. If the Software has been delivered by Intel on

physical media, Intel warrants the media to be free from material physical

defects for a period of ninety days after delivery by Intel. If such a defect

is found, return the media to Intel for replacement or alternate delivery of

the Software as Intel may select.

EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE, THE SOFTWARE IS

PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED WARRANTY OF ANY KIND

INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, OR FITNESS FOR A

PARTICULAR PURPOSE. Intel does not warrant or assume responsibility for the

accuracy or completeness of any information, text, graphics, links or other

items contained within the Software.

LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS SUPPLIERS BE LIABLE

FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, LOST PROFITS,

BUSINESS INTERRUPTION, OR LOST INFORMATION) ARISING OUT OF THE USE OF OR

INABILITY TO USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT EXCLUSION OR

LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES OR CONSEQUENTIAL OR INCIDENTAL

DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE

OTHER LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION.

TERMINATION OF THIS AGREEMENT. Intel may terminate this Agreement at any time

if you violate its terms. Upon termination, you will immediately destroy the

Software or return all copies of the Software to Intel.

APPLICABLE LAWS. Claims arising under this Agreement shall be governed by the

laws of California, excluding its principles of conflict of laws and the

United Nations Convention on Contracts for the Sale of Goods. You may not

export the Software in violation of applicable export laws and regulations.

Intel is not obligated under any other agreements unless they are in writing

and signed by an authorized representative of Intel.

GOVERNMENT RESTRICTED RIGHTS. The Software is provided with "RESTRICTED

RIGHTS." Use, duplication, or disclosure by the Government is subject to

restrictions as set forth in FAR52.227-14 and DFAR252.227-7013 et seq. or its

successor. Use of the Software by the Government constitutes acknowledgment

of Intel's proprietary rights therein. Contractor or Manufacturer is Intel

2200 Mission College Blvd., Santa Clara, CA 95052.

사용권 계약에 동의합니다

사용권 계약에 동의하지 않습니다

제품 특징 지원, 특종 콘텐츠 및 더많은 정보 제공.

제품 지원

제품 특징 지원, 특종 콘텐츠 및 더많은 정보 제공.

제품 사양

제품 사양

필요한 모든 정보를 간편하게 확인할 수 있습니다

피드백

인텔에서는 다운로드 센터가 유용한 리소스로 활용될 수 있도록 지속적으로 개선하고 있습니다. 의견이나 질문 또는 제안 사항이 있으면 이곳에서 제출해 주십시오.

인텔® 제품과 관련하여 도움이 필요하십니까? 지원팀 연락 방법

이 사이트의 정보가 유용했습니까?

개인 정보는 이 질의에 응답하기 위한 용도로만 사용됩니다. 이름과 이메일 주소는 메일 목록에 추가되지 않으며 요청이 있지 않는 한 인텔사로부터 이메일을 받지 않습니다. ‘제출’을 클릭하면 인텔 이용 약관을 수락하고 인텔 개인 정보 보호 정책을 이해했다는 데 동의한 것으로 간주합니다.