개요
인텔® QSFP+ Configuration Utility는 명령줄 유틸리티로,
사용자가 설치 된 QSFP + 모듈의 링크 유형을 변경할 수 있습니다. 지원 되는 유형
어댑터의 NVM 내에서 정의 됩니다. 이 유틸리티는
QSFP + 재구성을 잠재적으로 지원 합니다. 장치 당 하나의 포트만 표시 됩니다.
변경은 개별 포트가 아닌 전체 장치에 영향을 미칩니다.
참고: 구성 변경 사항을 적용 하려면 재부팅이 필요 합니다. 실행 하는 시스템에서
Oracle * Solaris * 11의 경우, 전체 재부팅을 수행 해야 하 고 빠른 재부팅이 필요 하지 않습니다.
지원 되는 운영 체제
노트
유틸리티 실행
"/?" 옵션을 사용 하면 지원 되는 명령줄 옵션의 목록이 표시 됩니다.
참고: 루트/관리자 권한으로 유틸리티를 실행 해야 합니다.
옵션
인텔® QSFP+ Configuration Utility는 다음 중 하나를 사용 하 여 실행할 수 있습니다.
명령줄 옵션입니다.
노트:
슬래시 '/' 문자 대신 대시 '-' 문자를 사용할 수 있습니다.
모든 옵션은 대/소문자를 구분 합니다.
/HELP 또는/?
명령줄 도움말과 같은 정보를 표시 합니다.
/version
도구 버전 정보를 표시 합니다.
/EXITCODES
종료 코드 지원을 표시 합니다.
/장치
시스템에 지원 되는 장치를 표시 합니다.
참고: Mode 열에 "N/A" 값이 표시 됩니다.
QSFP + 구성을 지원 하지만 현재 펌웨어는 구성 하지 않습니다.
아래의 기본 사용 예를 참조 하십시오.
/REI = XX
특정 어댑터를 선택 합니다 (1-32).
/정보
지원 되는 QSFP + 링크 모드를 표시 합니다. /NIC.와 함께 사용 하십시오.
/SET [링크 모드]
선택한 QSFP + link 모드를 구성 합니다. /NIC.와 함께 사용 하십시오.
참고: 변경 사항이 적용 되려면 플랫폼을 재설정 해야 합니다.
기본 사용 예
다음 예는/CDEVICES 옵션에 대 한 도구의 출력을 보여줍니다.
/INFO 옵션 및/SET 옵션을 선택 합니다.
장치로
---------
QCU > QCUW64E. EXE/기기
NIC B:D Ven-개발 모드 어댑터 이름
=== === ========= ===== ============================================
1) 01:00 8086-1584 4x10 인텔 ® 이더넷 컨트롤러 X L 710 (40GbE QSFP +)
2) 04:00 8086-1583 N/A 인텔 ® 이더넷 컨트롤러 X L 710 (40GbE backplan)
정보
------
> QCUW64E. EXE/NIC = 3/정보
인텔® QSFP+ Configuration Utility vXX. v. v. v. v. xx.
저작권© 2015 Intel Corporation.
인텔 독점 라이센스로 릴리스된 소프트웨어.
어댑터는 QSFP + 구성 수정을 지원 합니다.
현재 구성: 1x40
지원 되는 구성: 1x40, 4x10
/set:
-----
> QCUW64E. EXE/NIC = 3/SET 4x10
인텔® QSFP+ Configuration Utility vXX. v. v. v. v. xx.
저작권© 2015 Intel Corporation.
인텔 독점 라이센스로 릴리스된 소프트웨어.
QSFP + 구성이 변경 되었습니다. 변경 사항이 적용 되도록 플랫폼을 다시 설정 하십시오.
효과.
종료 코드
인텔® QSFP+ Configuration Utility는 종료 코드를 명령줄로 반환 합니다.
이러한 각 코드에 대 한 설명은 다음을 실행 하 여 도구에서 찾을 수 있습니다.
QCU/TEXITCODE
설치
Microsoft Windows *에 도구를 설치 하는 중:
Windows에 도구의 드라이버를 설치 하려면 해당 컴퓨터에서 .bat 설치를 실행 하십시오.
설치 패키지의 디렉터리입니다.
이 도구는 설치 .bat와 함께 설치 되지 않지만 해당 도구가
로컬 컴퓨터 Windows 드라이버 디렉터리에 복사 해야 합니다. 실행 하려면
도구를 실행 하 여 Windows 시작 메뉴에서 명령 프롬프트 창을 시작 합니다. 으로 이동 하 여
도구가 위치한 미디어 및 디렉터리와 유틸리티를 실행 합니다. 추가 정보
각 도구의 파일은 도구와 동일한 디렉토리에 있습니다. 이러한 도구
모든 디렉터리의 로컬 하드 드라이브에 수동으로 설치할 수 있습니다.
도구가 시스템 네트워크 드라이버와 동일한 자체 드라이버 파일을 사용 합니다.
드라이버 sys 파일이 드라이버 디렉터리에 이미 존재 하는 경우에는 설치 프로그램이
복사가 실패 했습니다. ".Bat"와 함께/y 스위치를 사용 하면 설치 프로그램이
드라이버 파일의 위치. 그러나이는 이전 버전의
인텔® PROSet와 같은 다른 응용 프로그램에서 드라이버를 사용 하 고 있습니다.
Windows 장치 관리자. 드라이버가 드라이버 디렉토리에 이미 존재 하는 경우,
명령 프롬프트에서 도구를 실행 해 보십시오. 실행 되는 경우, 드라이버는
잘. 존재 하지 않는 드라이버 버전을 지정 하면 도구가 실행 되지 않습니다.
드라이버 버전이 필요 합니다.
노트:
%Systemroot%\system32\drivers에 대 한 액세스 권한이 있어야 합니다.
디렉터리. 관리자 계정에만 이러한 권한이 있습니다. 해야 할
관리자로 로그인 되어 있거나 관리자 권한으로 도구가 실행 되어야 합니다.
Windows에서 장치 관리자에서 비활성화 된 장치는 메모리 리소스가 없기 때문에 도구를 통해 액세스할 수 없습니다. 오류 코드 0xC86A800E가 발생 합니다. 이 문제를 해결 하기 위해 다음 중 하나를 수행할 수 있습니다.
Microsoft Windows Server * Nano 서버에 도구 설치
Nano 서버를 실행 하는 시스템에 도구를 설치 하려면 Microsoft
Windows PowerShell * 호스트 시스템에서 도구 및 드라이버 파일 복사
Nano 서버 이외의 Windows 버전을 대상 시스템으로 실행
Nano 서버 실행 중. 도구 및 드라이버 파일은
\TOOLS\Nanox64\SVTools 폴더의 설치 미디어.
다음은 설치 프로시저입니다.
EFI에 도구 설치
EFI 도구는 설치 하지 않아도 됩니다. 도구는 간단히 복사할 수 있습니다.
해당 디렉터리부터 실행 될 드라이브까지 EFI2
이진 파일은 uefi 2.3 to i 프로토콜에서 UEFI 셸 2(sp2)와 함께 사용할 수 있습니다.
EFI2 도구는 EFI 셸 1X에서 실행 되지 않으며 UEFI 2.3 to i 프로토콜이
없습니다.
참고: EFI가 USB 드라이브를 지 원하는 반면, 도구를 실행 하는 데 문제가 있을 수 있습니다.
USB 드라이브에서. BIOS에 특정 한 문제가 있는지 여부. 할 경우
문제가 발생 하면 하드 디스크에서 도구를 대신 실행 하십시오.
DOS에 도구 설치
이 도구는 다양 한 DOS 버전을 지원 합니다. 다음에 대 한 설치는 필요 하지 않습니다.
DOS 도구입니다. 도구는 CD의 DOS 디렉터리에서 간단히 복사 하 여
실행 될 드라이브입니다. 이 도구에는 정상
부팅 환경. 도구는 메모리 관리자 및/또는 DOS로 실행 되지 않습니다.
네트워킹 드라이버가 로드 되었습니다. 도구가 완벽 하 고 무제한적인 것으로 기대 합니다.
하드웨어를 제어 합니다. EMM386이 있는 경우 도구가 제대로 실행 되지 않습니다.
이 툴은 보호 모드 32 비트 DOS에서 실행 됩니다. 따라서
TSR 프로그램과 호환 됩니다.
Linux *에 도구 설치
Linux *에서이 도구를 실행 하려면 기본 드라이버가 설치 되어 있어야 합니다.
시스템.
VMWare * ESXi *에 도구 설치
VMWare * ESXi *에서이 도구를 실행 하려면 기본 드라이버가 설치 되어 있어야 합니다.
시스템.
참고: 두 가지 버전의 유틸리티가 있습니다. ESXi 6.0 이상에서는 qcun64e를 사용 하십시오. 이전 버전의 ESXi 경우에는 qcu64e를 사용 하십시오.
FreeBSD *에 도구를 설치 하는 중
FreeBSD에서이 도구를 실행 하려면 기본 드라이버가 설치 되어 있어야 합니다.
시스템.
소프트웨어에 포함된 소프트웨어 사용권 계약 조항에 따라 소프트웨어를 사용해야 합니다.
IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING.
Do not use or load this software and any associated materials (collectively,
the "Software") until you have carefully read the following terms and
conditions. By loading or using the Software, you agree to the terms of this
Agreement. If you do not wish to so agree, do not install or use the Software.
LICENSES: Please Note:
- If you are a network administrator, the "Site License" below shall
apply to you.
- If you are an end user, the "Single User License" shall apply to you.
- If you are an original equipment manufacturer (OEM), the "OEM License"
shall apply to you.
SITE LICENSE. You may copy the Software onto your organization's computers
for your organization's use, and you may make a reasonable number of
back-up copies of the Software, subject to these conditions:
1. This Software is licensed for use only in conjunction with Intel
component products. Use of the Software in conjunction with non-Intel
component products is not licensed hereunder.
2. You may not copy, modify, rent, sell, distribute or transfer any part
of the Software except as provided in this Agreement, and you agree to
prevent unauthorized copying of the Software.
3. You may not reverse engineer, decompile, or disassemble the Software.
4. You may not sublicense or permit simultaneous use of the Software by
more than one user.
5. The Software may include portions offered on terms in addition to those
set out here, as set out in a license accompanying those portions.
SINGLE USER LICENSE. You may copy the Software onto a single computer for
your personal, noncommercial use, and you may make one back-up copy of the
Software, subject to these conditions:
1. This Software is licensed for use only in conjunction with Intel
component products. Use of the Software in conjunction with non-Intel
component products is not licensed hereunder.
2. You may not copy, modify, rent, sell, distribute or transfer any part
of the Software except as provided in this Agreement, and you agree to
prevent unauthorized copying of the Software.
3. You may not reverse engineer, decompile, or disassemble the Software.
4. You may not sublicense or permit simultaneous use of the Software by
more than one user.
5. The Software may include portions offered on terms in addition to those
set out here, as set out in a license accompanying those portions.
OEM LICENSE: You may reproduce and distribute the Software only as an
integral part of or incorporated in Your product or as a standalone
Software maintenance update for existing end users of Your products,
excluding any other standalone products, subject to these conditions:
1. This Software is licensed for use only in conjunction with Intel
component products. Use of the Software in conjunction with non-Intel
component products is not licensed hereunder.
2. You may not copy, modify, rent, sell, distribute or transfer any part
of the Software except as provided in this Agreement, and you agree to
prevent unauthorized copying of the Software.
3. You may not reverse engineer, decompile, or disassemble the Software.
4. You may only distribute the Software to your customers pursuant to a
written license agreement. Such license agreement may be a "break-the-
seal" license agreement. At a minimum such license shall safeguard
Intel's ownership rights to the Software.
5. The Software may include portions offered on terms in addition to those
set out here, as set out in a license accompanying those portions.
NO OTHER RIGHTS. No rights or licenses are granted by Intel to You, expressly
or by implication, with respect to any proprietary information or patent,
copyright, mask work, trademark, trade secret, or other intellectual property
right owned or controlled by Intel, except as expressly provided in this
Agreement.
OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Software
remains with Intel or its suppliers. The Software is copyrighted and
protected by the laws of the United States and other countries, and
international treaty provisions. You may not remove any copyright notices
from the Software. Intel may make changes to the Software, or to items
referenced therein, at any time without notice, but is not obligated to
support or update the Software. Except as otherwise expressly provided, Intel
grants no express or implied right under Intel patents, copyrights,
trademarks, or other intellectual property rights. You may transfer the
Software only if the recipient agrees to be fully bound by these terms and if
you retain no copies of the Software.
LIMITED MEDIA WARRANTY. If the Software has been delivered by Intel on
physical media, Intel warrants the media to be free from material physical
defects for a period of ninety days after delivery by Intel. If such a defect
is found, return the media to Intel for replacement or alternate delivery of
the Software as Intel may select.
EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE, THE SOFTWARE IS
PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED WARRANTY OF ANY KIND
INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, OR FITNESS FOR A
PARTICULAR PURPOSE. Intel does not warrant or assume responsibility for the
accuracy or completeness of any information, text, graphics, links or other
items contained within the Software.
LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS SUPPLIERS BE LIABLE
FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, LOST PROFITS,
BUSINESS INTERRUPTION, OR LOST INFORMATION) ARISING OUT OF THE USE OF OR
INABILITY TO USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT EXCLUSION OR
LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES OR CONSEQUENTIAL OR INCIDENTAL
DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE
OTHER LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION.
TERMINATION OF THIS AGREEMENT. Intel may terminate this Agreement at any time
if you violate its terms. Upon termination, you will immediately destroy the
Software or return all copies of the Software to Intel.
APPLICABLE LAWS. Claims arising under this Agreement shall be governed by the
laws of California, excluding its principles of conflict of laws and the
United Nations Convention on Contracts for the Sale of Goods. You may not
export the Software in violation of applicable export laws and regulations.
Intel is not obligated under any other agreements unless they are in writing
and signed by an authorized representative of Intel.
GOVERNMENT RESTRICTED RIGHTS. The Software is provided with "RESTRICTED
RIGHTS." Use, duplication, or disclosure by the Government is subject to
restrictions as set forth in FAR52.227-14 and DFAR252.227-7013 et seq. or its
successor. Use of the Software by the Government constitutes acknowledgment
of Intel's proprietary rights therein. Contractor or Manufacturer is Intel
2200 Mission College Blvd., Santa Clara, CA 95052.
인텔에서는 다운로드 센터가 유용한 리소스로 활용될 수 있도록 지속적으로 개선하고 있습니다. 의견이나 질문 또는 제안 사항이 있으면 이곳에서 제출해 주십시오.
인텔® 제품과 관련하여 도움이 필요하십니까? 지원팀 연락 방법
개인 정보는 이 질의에 응답하기 위한 용도로만 사용됩니다. 이름과 이메일 주소는 메일 목록에 추가되지 않으며 요청이 있지 않는 한 인텔사로부터 이메일을 받지 않습니다. ‘제출’을 클릭하면 인텔 이용 약관을 수락하고 인텔 개인 정보 보호 정책을 이해했다는 데 동의한 것으로 간주합니다.