Intel® Solid-State Drive Data Center Tool - 910 Series

(¿Qué archivo debo descargar?)

Descargas disponibles

Descarga
Versión: 1.1 (más recientes)
Fecha: 03/10/2012
Tamaño: 5,26 MB
Lenguaje: Inglés
Sistemas operativos: Red Hat Enterprise Linux 5*, Red Hat Enterprise Linux 6*, SUSE Linux Enterprise Server 11*
Descarga
Versión: 1.1 (más recientes)
Fecha: 25/07/2013
Tamaño: 2,55 MB
Lenguaje: Inglés
Sistemas operativos: Windows Server 2003 *, Windows 10, 32 bit*, Windows 10, 64 bit*, Windows 7 *, Windows Server 2008 R2*

Descripción detallada:

If you are looking for the Intel® SSD Data Center Tool 2.0, please go here.

The Intel® Solid-State Drive Data Center Tool (Intel® SSD DCT) is drive management software for the Intel® Solid-State Drive 910 Series (Intel® SSD 910 Series) that provides the following features:

   -   Detecting PCIe* devices and associated drives attached to the system.
   -   Erasing data on the SSD(s) by issuing a SCSI Full Format Unit command.
   -   Resizing the SSD(s) by changing its maximum Logical Block Address (LBA).
   -   Updating the firmware for the SSD(s).
   -   Issuing SCSI read and write commands to the SSD.
   -   Reading and parsing SCSI Inquiry pages and Log pages.
   -   Changing the drives performance by changing the Power Setting configuration.

The user interface for this tool is a Command Line Interface for both Windows* and Linux*.

Only 64-bit operating systems are supported and only in English.

The User Guide is included in both the ZIP (for Microsoft Windows) and TAR (For Linux) files along with a copy of the software license.

Installation is simply downloading the ZIP or TAR file which contains the User Guide, License and the tool itself, extracting the files and running the tool on the host system containing the Intel SSD 910 Series.

HELPFUL NOTES:
-   The 910 Series Data Center Tool has a help screen providing additional information.
-   Both the Windows and Linux versions of this tool are command line based.
-   The Intel® SSD Toolbox does not work with the 910 Series SSD.
-   The Intel® SSD Toolbox does not work with Linux.

NOTE: On Microsoft Windows 7*, and Microsoft Windows Server 2008*/R2, administrator access is required via one of the following methods:
-   Open a command prompt as administrator and run the tool via the commands listed below.
-   Disable UAC where applicable and run the too by running it in a command prompt.

NOTE: On Linux systems, run the tool with root privileges. This can be done through either sudo or su commands. Also, Linux users will need to make sure the tool has executable rights.

If assistance is needed with the installation or problems occur using the tool, contact Intel Customer Support.

The Intel SSD Data Center Tool supports firmware updates on the following Intel SSDs;

                                  Intel® Solid-State Drive                        Latest Firmware Version

                      Intel® Solid-State Drive 910 Series 400 GB                     1200C008A424
                      Intel® Solid-State Drive 910 Series 800 GB                     1200D006A424

                  
The Intel SSD Data Center Tool does not support any other Intel SSDs.                              

Esta descarga es válida para los productos mencionados a continuación.