Introduction
As of 17 February 2024, no functional, security, or other updates will be provided for Intel® Server Board M10JNP Family BIOS and Firmware Update Packages. Intel® Server Board M10JNP Family BIOS and Firmware Update Packages will no longer be available after 29 March 2024. All versions are provided as is. Intel recommends that users of Intel® Server Board M10JNP Family BIOS and Firmware discontinue use as soon as possible. Provides the Intel® Server Board M10JNP2SB Firmware Update Package.
Available Downloads
- OS Independent
- Size: 68.9 MB
- SHA1: C661BE89F5FC7B6962EBD44F2AAEB8FBD2D9D51C
Detailed Description
Firmware Update Instructions Installation and Operation
Intel highly recommends reading this document in its entirety before performing
the firmware update. Verifying that your board meets the documented requirements
will ensure a successful update and provide the most reliable
functionality after the update has completed.
Released - February 2020
This update package includes the following production level firmware
updates:
- Board BIOS - 7.210
- BMC Firmware - 8100.01.03
Firmware Update Tools
- Yafuflash*
- SocFlash* utility
Supported Products
- Intel® Server Board M10JNP2SB
IMPORTANT NOTES
WARNING: It is very important to follow these instructions as they are written.
Failure to update using the proper procedure may cause damage to your system.
Advisory Note
Do not modify any of the script files. The scripts as written will provide
the most reliable update experience
To run these updates, you must boot the system to the embedded uEFI shell.
Hardware and firmware requirements
To update the firmware stack to the versions included in this update package,
the currently loaded firmware stack on the system must meet the following:
- BIOS with ME update V7.2xx
Important: To ensure a proper system update, install BIOS updates first, and then install BMC updates.
General installation procedure BIOS
1. Unzip the contents of the M10JNP2SBXXXX firmware update package and copy all files to the root directory of a removable media (USB flash drive).
2. Insert the USB flash drive to any available USB port on the system to be updated.
3. Power on the server and load the uEFI shell.
4. Access to the USB flash drive inserted and find the current directory (for example, 'fs0:\M10JNP2SBXXXX').
5. Begin the update process by running the following script: Update_BIOS.nsh.
6. When the flash has successfully completed, turn off the system.
7. Power on the system, enter to BIOS setup and check BIOS revision and ME revision with normal status on BIOS Setup Menu.
This download is valid for the product(s) listed below.
Disclaimers1
Product and Performance Information
Intel is in the process of removing non-inclusive language from our current documentation, user interfaces, and code. Please note that retroactive changes are not always possible, and some non-inclusive language may remain in older documentation, user interfaces, and code.