Intel® Server Board S2600BP Family BIOS and Firmware Update Package for UEFI

19055
5/15/2019

Introduction

As of 17 February 2024, no functional, security, or other updates will be provided for Intel® Server Board S2600BP Family BIOS and Firmware Update Packages. Intel® Server Board S2600BP Family BIOS and Firmware Update Packages will no longer be available after 29 March 2024. All versions are provided as is. Intel recommends that users of Intel® Server Board S2600BP Family BIOS and Firmware discontinue use as soon as possible. This download record contains the BIOS and firmware update package for the Intel® Server Board S2600BP Family, read firmware dependencies in requirements section.(02.01.0008)

Available Downloads

  • OS Independent
  • Size: 29.8 MB
  • SHA1: D689F3D5AF68A2267321092B18F56C2B1BCD2042

Detailed Description

Attention: 

Do NOT use this Software Update Package (SUP) if the system is an Intel® Data Center Block for Nutanix* Enterprise Cloud, the said system relies on Nutanix’s Prism Life Cycle Manager for any firmware updates. For more information, visit Nutanix* Life Cycle Manager page. For a list of hardware and firmware compatibility, visit the Nutanix* Hardware and Firmware compatibility page.

Firmware requirements 

To update the system firmware stack to the versions included in this update package, the currently loaded system firmware stack on the system must meet the following:

  • System BIOS: 00.01.0016
  • ME Firmware: 04.00.04.393 
  • BMC Firmware: 1.90.0cf6e935 
  • FRUSDR: 1.39 

Failure to get to the required firmware stack, may cause unexpected results. 

Purpose

This Firmware Update Package supports 1st and 2nd generation Intel® Xeon® Scalable Processor families.

This update package is for Intel® Server Board S2600BP family. This update package includes the following production-level system firmware updates:

  • System BIOS: 02.01.0008
  • ME Firmware: 04.01.04.251
  • BMC Firmware: 1.93.870cf4f0
  • FRUSDR: 1.39
  • DCPMM: 1.2.0.5346

To run these updates, you must boot the system to the embedded UEFI shell and follow the steps below:

  1. Run startup.nsh to update BIOS, ME, BMC, and FRUSDR.
  2. If DCPMM DIMM is installed in the system, reboot system after step 1 completed, and run startup.nsh again to update DCPMM firmware.

To see firmware updates and troubleshooting tips

Additional notes

  • See the release notes and readme files for installation instructions, supported hardware, what is new, bug fixes, and known issues.
  • This package contains BIOS recovery files. Refer to the BIOS recovery instructions in the BIOS release notes in this package.