Overview
The Intel® QSFP+ Configuration Utility is a command line utility that allows
users to change the link type of the installed QSFP+ module. The supported types
are defined within the adapter's NVM. This utility displays only the devices that
potentially support QSFP+ reconfiguration. Only one port per device is displayed,
since changes affect the device as a whole, not individual ports.
Note: A reboot is required to apply configuration changes. On systems running
Oracle* Solaris* 11, you must perform a full reboot, not a fast reboot.
Supported operating systems
Notes:
Running the utility
Using the "/?" option will display a list of supported command line options.
Note: The utility must be run with root/administrator privileges.
Options
The Intel® QSFP+ Configuration Utility can be run with any of the following
command line options.
Notes:
/HELP or /?
Displays command line help.
/VERSION
Displays tool version information.
/EXITCODES
Displays exit code help.
/DEVICES
Displays supported devices present in the system.
Note: The value "N/A" is displayed in the Mode column if the hardware
supports QSFP+ configuration but the current firmware does not.
See BASIC USAGE EXAMPLES below.
/NIC=XX
Selects a specific adapter (1-32).
/INFO
Displays supported QSFP+ link modes. Use only with /NIC.
/SET [LINK MODE]
Configures selected QSFP+ link mode. Use only with /NIC.
Note: You must reset the platform for the changes to take effect.
Basic usage examples
The following examples show the tool's output for the /DEVICES option,
the /INFO option, and the /SET option.
/DEVICES:
---------
QCU>QCUW64E.EXE /DEVICES
NIC B:D Ven-Dev Mode Adapter Name
=== === ========= ===== ============================================
1) 01:00 8086-1584 4x10 Intel(R) Ethernet Controller XL710 for 40GbE QSFP+
2) 04:00 8086-1583 N/A Intel(R) Ethernet Controller XL710 for 40GbE backplan
/INFO:
------
> QCUW64E.EXE /NIC=3 /INFO
Intel® QSFP+ Configuration Utility vXX.XX.XX.XX
Copyright © 2015 by Intel Corporation.
Software released under Intel Proprietary License.
Adapter supports QSFP+ Configuration modification.
Current Configuration: 1x40
Supported Configurations: 1x40, 4x10
/SET:
-----
> QCUW64E.EXE /NIC=3 /SET 4x10
Intel® QSFP+ Configuration Utility vXX.XX.XX.XX
Copyright © 2015 by Intel Corporation.
Software released under Intel Proprietary License.
QSFP+ configuration changed. Please reset platform for the changes to take
effect.
Exit codes
The Intel® QSFP+ Configuration Utility returns exit codes to the command line.
A description of each of these codes can be found in the tool by running
QCU /EXITCODES.
Installing the tool on Microsoft Windows*
To install the tools' drivers on Windows, run install.bat from the appropriate
directory of the install package.
Although the tool are not installed with install.bat, the driver that the tool
requires is copied into the local machine Windows driver directory. To run the
tool, launch a Command Prompt window from the Windows Start Menu. Go to the
media and directory where the tool is located and run the utility. The readme
files for each tool are found in the same directory as the tool. These tools
can be manually installed on the local hard drive in any directory.
The tool uses its own driver file (not the same as the system network driver).
If the driver sys file already exists in the drivers directory, install.bat may
fail to copy. Using the /y switch with install.bat will override and copy the
driver file regardless. However, this can be dangerous if an older version of
the driver is being used by another application such as Intel® PROSet for
Windows Device Manager. If a driver is already present in the drivers directory,
try running the tool from the command prompt. If it runs, then the driver is
fine. The tool will not run if the driver version present does not match the
driver version expected.
Note: You must have access to the %systemroot%\system32\drivers
directory. Only the administrator account has these privileges. You must be
logged in as administrator or the tools must be run as administrator.
Note: On Windows, any device that is disabled in device manager will not be
accessible by tools due to no memory resources. You would get an error code
0xC86A800E. To solve this problem, you can do one of the following:
Installing the tools on Microsoft Windows Server* Nano Server
To install the tools on systems running Nano Server, you must use Microsoft*
Windows PowerShell* to copy the tools and their driver files from a host system
running a version of Windows other than Nano Server to the target system
running Nano Server. The tools and their driver files are available from the
installation media in the \TOOLS\Nanox64\SVTools folder.
This is the installation procedure:
Installing the tools on EFI
There is no installation required for EFI tools. The tools can simply be copied
from the appropriate directory to the drive that they will run from. The EFI2
binaries are for use with the UEFI Shell 2.X with the UEFI 2.3 HII protocol.
EFI2 tools will not run on the EFI Shell 1.X or if the UEFI 2.3 HII protocol is
not present.
Note: While EFI supports USB drives, there may be issues running tools
from the USB drive. Whether or not there are issues are BIOS specific. If you
experience issues, run the tool from hard disk instead.
Installing the tools on DOS
The tools support various DOS versions. There is no installation required for
DOS tools. The tools can simply be copied from the DOS directory on the CD to
the drive that they will run from. It is expected that the tools have a clean
boot environment. The tools will not run with memory managers and/or DOS
networking drivers loaded. The tools expect that they have full, unlimited
control of the hardware. The tools WILL NOT run properly if EMM386 is present.
The tools run in protected mode, 32-bit DOS. Therefore, they will not be
compatible with any TSR programs.
Installing the tool on Linux*
In order to run this tool on Linux*, the base driver must be installed on
the system.
Installing the tool on VMWare* ESXi*
In order to run this tool on VMWare* ESXi*, the base driver must be installed on
the system.
Note: There are two versions of the utility. For ESXi 6.0 and later, use qcun64e. For prior versions of ESXi, use qcu64e.
Installing the tool on FreeBSD*
In order to run this tool on FreeBSD, the base driver must be installed on
the system.
The terms of the software license agreement included with any software you download will control your use of the software.
IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING.
Do not use or load this software and any associated materials (collectively,
the "Software") until you have carefully read the following terms and
conditions. By loading or using the Software, you agree to the terms of this
Agreement. If you do not wish to so agree, do not install or use the Software.
LICENSES: Please Note:
- If you are a network administrator, the "Site License" below shall
apply to you.
- If you are an end user, the "Single User License" shall apply to you.
- If you are an original equipment manufacturer (OEM), the "OEM License"
shall apply to you.
SITE LICENSE. You may copy the Software onto your organization's computers
for your organization's use, and you may make a reasonable number of
back-up copies of the Software, subject to these conditions:
1. This Software is licensed for use only in conjunction with Intel
component products. Use of the Software in conjunction with non-Intel
component products is not licensed hereunder.
2. You may not copy, modify, rent, sell, distribute or transfer any part
of the Software except as provided in this Agreement, and you agree to
prevent unauthorized copying of the Software.
3. You may not reverse engineer, decompile, or disassemble the Software.
4. You may not sublicense or permit simultaneous use of the Software by
more than one user.
5. The Software may include portions offered on terms in addition to those
set out here, as set out in a license accompanying those portions.
SINGLE USER LICENSE. You may copy the Software onto a single computer for
your personal, noncommercial use, and you may make one back-up copy of the
Software, subject to these conditions:
1. This Software is licensed for use only in conjunction with Intel
component products. Use of the Software in conjunction with non-Intel
component products is not licensed hereunder.
2. You may not copy, modify, rent, sell, distribute or transfer any part
of the Software except as provided in this Agreement, and you agree to
prevent unauthorized copying of the Software.
3. You may not reverse engineer, decompile, or disassemble the Software.
4. You may not sublicense or permit simultaneous use of the Software by
more than one user.
5. The Software may include portions offered on terms in addition to those
set out here, as set out in a license accompanying those portions.
OEM LICENSE: You may reproduce and distribute the Software only as an
integral part of or incorporated in Your product or as a standalone
Software maintenance update for existing end users of Your products,
excluding any other standalone products, subject to these conditions:
1. This Software is licensed for use only in conjunction with Intel
component products. Use of the Software in conjunction with non-Intel
component products is not licensed hereunder.
2. You may not copy, modify, rent, sell, distribute or transfer any part
of the Software except as provided in this Agreement, and you agree to
prevent unauthorized copying of the Software.
3. You may not reverse engineer, decompile, or disassemble the Software.
4. You may only distribute the Software to your customers pursuant to a
written license agreement. Such license agreement may be a "break-the-
seal" license agreement. At a minimum such license shall safeguard
Intel's ownership rights to the Software.
5. The Software may include portions offered on terms in addition to those
set out here, as set out in a license accompanying those portions.
NO OTHER RIGHTS. No rights or licenses are granted by Intel to You, expressly
or by implication, with respect to any proprietary information or patent,
copyright, mask work, trademark, trade secret, or other intellectual property
right owned or controlled by Intel, except as expressly provided in this
Agreement.
OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Software
remains with Intel or its suppliers. The Software is copyrighted and
protected by the laws of the United States and other countries, and
international treaty provisions. You may not remove any copyright notices
from the Software. Intel may make changes to the Software, or to items
referenced therein, at any time without notice, but is not obligated to
support or update the Software. Except as otherwise expressly provided, Intel
grants no express or implied right under Intel patents, copyrights,
trademarks, or other intellectual property rights. You may transfer the
Software only if the recipient agrees to be fully bound by these terms and if
you retain no copies of the Software.
LIMITED MEDIA WARRANTY. If the Software has been delivered by Intel on
physical media, Intel warrants the media to be free from material physical
defects for a period of ninety days after delivery by Intel. If such a defect
is found, return the media to Intel for replacement or alternate delivery of
the Software as Intel may select.
EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE, THE SOFTWARE IS
PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED WARRANTY OF ANY KIND
INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, OR FITNESS FOR A
PARTICULAR PURPOSE. Intel does not warrant or assume responsibility for the
accuracy or completeness of any information, text, graphics, links or other
items contained within the Software.
LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS SUPPLIERS BE LIABLE
FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, LOST PROFITS,
BUSINESS INTERRUPTION, OR LOST INFORMATION) ARISING OUT OF THE USE OF OR
INABILITY TO USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT EXCLUSION OR
LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES OR CONSEQUENTIAL OR INCIDENTAL
DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE
OTHER LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION.
TERMINATION OF THIS AGREEMENT. Intel may terminate this Agreement at any time
if you violate its terms. Upon termination, you will immediately destroy the
Software or return all copies of the Software to Intel.
APPLICABLE LAWS. Claims arising under this Agreement shall be governed by the
laws of California, excluding its principles of conflict of laws and the
United Nations Convention on Contracts for the Sale of Goods. You may not
export the Software in violation of applicable export laws and regulations.
Intel is not obligated under any other agreements unless they are in writing
and signed by an authorized representative of Intel.
GOVERNMENT RESTRICTED RIGHTS. The Software is provided with "RESTRICTED
RIGHTS." Use, duplication, or disclosure by the Government is subject to
restrictions as set forth in FAR52.227-14 and DFAR252.227-7013 et seq. or its
successor. Use of the Software by the Government constitutes acknowledgment
of Intel's proprietary rights therein. Contractor or Manufacturer is Intel
2200 Mission College Blvd., Santa Clara, CA 95052.
Our goal is to make Download Center a valuable resource for you. Please submit your comments, questions, or suggestions here.
Need help with an Intel® product? Contact Support
Your personal information will be used to respond to this inquiry only. Your name and email address will not be added to any mailing list, and you will not receive email from Intel Corporation unless requested. Clicking ‘Submit’ confirms your acceptance of the Intel Terms of Use and understanding of the Intel Privacy Policy.