Intel® Integrator Toolkit

18786
1/22/2020

Introduction

Intel® Integrator Toolkit is a command line utility used to customize BIOS on Intel® NUC and Intel® Compute Stick products.

Available Downloads

  • OS Independent
  • Size: 847.3 KB
  • SHA256: CBE15AD83241F1CB7BF8C3BC22FC4EB628CFAA7D7F3FCB46A191CD83EB0312D4

Detailed Description

Discontinued Product

This product has been discontinued. Refer to NUC Discontinuation Notice for more information.

 

Purpose

The Intel® Integrator Toolkit is a UEFI command line utility that is designed for integrators who are customizing the BIOS of Intel® NUC and Intel® Compute Stick products. 

Notes

If any of the features are not working correctly, make sure the BIOS is updated to the latest version.

The ITK6.efi program must be run from a FAT32-formatted USB drive. The system where you run the utility (an Intel NUC or Intel Compute Stick) must have the Internal UEFI shell option enabled in the BIOS.

To enable the Internal UEFI shell on Intel NUC:

  1. Press F2 during boot to enter BIOS Setup.
  2. Go to Advanced -> Boot -> Boot Configuration.
  3. In the Boot Devices pane, enable Internal UEFI Shell. 
  4. Press F10 to save and exit BIOS Setup.

To enable the internal UEFI shell on Intel Compute Stick:

  1. Press F2 during boot to enter BIOS Setup.
  2. Go to Configuration.
  3. Enable Internal UEFI Shell.
  4. Press F10 to save and exit BIOS Setup.

 

Intel® Integrator Toolkit is only supported by the Visual BIOS-based products. If your Intel® NUC is not included in the product list below, download and use Intel® Aptio V Integrator Tools instead.

 

This download is valid for the product(s) listed below.

Disclaimers1

Product and Performance Information

1

Intel is in the process of removing non-inclusive language from our current documentation, user interfaces, and code. Please note that retroactive changes are not always possible, and some non-inclusive language may remain in older documentation, user interfaces, and code.