Support

Intel® Solid-State Drive Data Center Tool - 910 Series

Intel® Solid-State Drive Data Center Tool - 910 Series

Version: 1.1 (Latest) Date: 7/25/2013

Available Downloads

Red Hat Enterprise Linux 5*
SUSE Linux Enterprise Server 11*
Red Hat Enterprise Linux 6*

English

5.26 MB

Intel SSD Data Center Tool 1_1_0 Linux.tar

Windows Server 2003*
Windows 7*
Windows Server 2008 R2*
Windows® 10, 32-bit
Windows® 10, 64-bit

English

2.55 MB

Intel SSD Data Center Tool 1_1_0 Windows.zip

Detailed Description

If you are looking for the Intel® SSD Data Center Tool 2.0, please go here.

The Intel® Solid-State Drive Data Center Tool (Intel® SSD DCT) is drive management software for the Intel® Solid-State Drive 910 Series (Intel® SSD 910 Series) that provides the following features:

   -   Detecting PCIe* devices and associated drives attached to the system.
   -   Erasing data on the SSD(s) by issuing a SCSI Full Format Unit command.
   -   Resizing the SSD(s) by changing its maximum Logical Block Address (LBA).
   -   Updating the firmware for the SSD(s).
   -   Issuing SCSI read and write commands to the SSD.
   -   Reading and parsing SCSI Inquiry pages and Log pages.
   -   Changing the drives performance by changing the Power Setting configuration.

The user interface for this tool is a Command Line Interface for both Windows* and Linux*.

Only 64-bit operating systems are supported and only in English.

The User Guide is included in both the ZIP (for Microsoft Windows) and TAR (For Linux) files along with a copy of the software license.

Installation is simply downloading the ZIP or TAR file which contains the User Guide, License and the tool itself, extracting the files and running the tool on the host system containing the Intel SSD 910 Series.

HELPFUL NOTES:
-   The 910 Series Data Center Tool has a help screen providing additional information.
-   Both the Windows and Linux versions of this tool are command line based.
-   The Intel® SSD Toolbox does not work with the 910 Series SSD.
-   The Intel® SSD Toolbox does not work with Linux.

NOTE: On Microsoft Windows 7*, and Microsoft Windows Server 2008*/R2, administrator access is required via one of the following methods:
-   Open a command prompt as administrator and run the tool via the commands listed below.
-   Disable UAC where applicable and run the too by running it in a command prompt.

NOTE: On Linux systems, run the tool with root privileges. This can be done through either sudo or su commands. Also, Linux users will need to make sure the tool has executable rights.

If assistance is needed with the installation or problems occur using the tool, contact Intel Customer Support.

The Intel SSD Data Center Tool supports firmware updates on the following Intel SSDs;

                                  Intel® Solid-State Drive                        Latest Firmware Version

                      Intel® Solid-State Drive 910 Series 400 GB                     1200C008A424
                      Intel® Solid-State Drive 910 Series 800 GB                     1200D006A424

                  
The Intel SSD Data Center Tool does not support any other Intel SSDs.                              

Release Notes

This download is valid for the product(s) listed below.

Intel Software License Agreement

X

The terms of the software license agreement included with any software you download will control your use of the software.

Copyright (c) Intel Corporation 2012 All Rights Reserved.

**************************************************************************

* Intel Corporation disclaims all warranties and liabilities

* for the use of this document, the software and the information

* contained therein, and assumes no responsibility for any errors

* which may appear in this document or the software, nor does

* Intel make a commitment to update the information or software

* contained or referenced herein. Intel reserves the right to make

* changes to this document or to the software at any time, without notice.

**************************************************************************

INTEL SOFTWARE LICENSE AGREEMENT (OEM/IHV/ISV Distribution & Single User):

Intel® SSD Data Center Tool

**************************************************************************

IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING.

Do not use or load this software or any associated materials

(collectively, the "Software") until you have carefully read

the following terms and conditions. By loading or using the

Software, you agree to the terms of this Agreement. If you

do not wish to so agree, do not install or use the Software.

Please Also Note:

If you are an Original Equipment Manufacturer(OEM), Independent

Hardware Vendor (IHV), or Independent Software Vendor (ISV),

this complete LICENSE AGREEMENT applies;

If you are an End-User, then only Exhibit A, the INTEL

SOFTWARE LICENSE AGREEMENT, applies.

For OEMs, IHVs, and ISVs:

LICENSE. This Software is licensed for use only in conjunction with

Intel component products. Use of the Software in conjunction with

non-Intel component products is not licensed hereunder. Subject to

the terms of this Agreement, Intel grants to You a nonexclusive,

nontransferable, worldwide, fully paid-up license under Intel's copyrights

to:

a) use, and copy Software internally for Your own development and

maintenance purposes; and

b) copy and distribute Software to Your end-users, but only under a

license agreement with terms at least as restrictive as those

contained in Intel's Final, Single User License Agreement, attached

as Exhibit A; and

c) copy and distribute the end-user documentation which may accompany

the Software, but only in association with the Software.

If You are not the final manufacturer or vendor of a computer system or

software program incorporating the Software, then You may transfer a copy of

the Software, and related end-user documentation) to Your recipient for use

in accordance with the terms of this Agreement, provided such recipient agrees

to be fully bound by the terms hereof. You will not otherwise assign,

sublicense, lease, or in any other way transfer or disclose Software to any

third party. You will not reverse-compile, disassemble or otherwise reverse-engineer the Software.

Except as expressly stated in this Agreement, no license or right is granted

to You directly or by implication, inducement, estoppel or otherwise. Intel

will have the right to inspect or have an independent auditor inspect Your

relevant records to verify Your compliance with the terms and conditions

of this Agreement.

CONFIDENTIALITY. If You wish to have a third party consultant or

subcontractor ("Contractor") perform work on Your behalf which involves access

to or use of Software, You will obtain a written confidentiality agreement

from the Contractor which contains terms and obligations with respect to access

to or use of Software no less restrictive than those set forth in this

Agreement and excluding any distribution rights, and use for any other purpose.

Otherwise, You will not disclose the terms or existence of this Agreement or

use Intel's name in any publications, advertisements, or other announcements without Intel's prior written consent. You do not have any rights to use any

Intel trademarks or logos.

OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Software

remains with Intel or its suppliers. The Software is copyrighted and protected

by the laws of the United States and other countries, and international treaty provisions. You may not remove any copyright notices from the Software. Intel

may make changes to the Software, or to items referenced therein, at any time

and without notice, but is not obligated to support or update the Software.

Except as otherwise expressly provided, Intel grants no express or implied

right under Intel patents, copyrights, trademarks, or other intellectual

property rights.

You may transfer the Software only if the recipient agrees to be fully bound

by these terms and if you retain no copies of the Software.

LIMITED MEDIA WARRANTY. If the Software has been delivered by Intel on

physical media, Intel warrants the media to be free from material physical

defects for a period of ninety (90) days after delivery by Intel. If such a

defect is found, return the media to Intel for replacement or alternate

delivery of the Software as Intel may select.

EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE, THE SOFTWARE IS

PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED WARRANTY OF ANY KIND,

INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, OR FITNESS FOR A PARTICULAR PURPOSE. Intel does not warrant or assume responsibility for

the accuracy or completeness of any information, text, graphics, links or

other items contained within the Software.

LIMITATION OF LIABILITY. IN NO EVENT WILL INTEL OR ITS SUPPLIERS BE LIABLE

FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, LOST PROFITS,

BUSINESS INTERRUPTION OR LOST INFORMATION) ARISING OUT OF THE USE OF OR

INABILITY TO USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT EXCLUSION OR

LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES OR CONSEQUENTIAL OR INCIDENTAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE OTHER

LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION.

TERMINATION OF THIS AGREEMENT. Intel may terminate this Agreement at any

time if you violate its terms. Upon termination, you will immediately

destroy the Software or return all copies of the Software to Intel.

APPLICABLE LAWS. Claims arising under this Agreement will be governed by

the laws of Delaware, excluding its principles of conflict of laws and the

United Nations Convention on Contracts for the Sale of Goods. You may not

export the Software in violation of applicable export laws and regulations.

Intel is not obligated under any other agreements unless they are in writing

and signed by an authorized representative of Intel.

GOVERNMENT RESTRICTED RIGHTS. The Software is provided with "RESTRICTED

RIGHTS." Use, duplication, or disclosure by the Government is subject to restrictions as set forth in FAR52.227-14 and DFAR252.227-7013 et seq.

or their successors. Use of the Software by the Government constitutes acknowledgment of Intel's proprietary rights therein. Contractor or

Manufacturer is Intel Corporation, 2200 Mission College Blvd., Santa

Clara, CA 95052.

EXHIBIT "A"

INTEL SOFTWARE LICENSE AGREEMENT (Final, Single User)

IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING.

Do not use or load this software or any associated materials (collectively,

the "Software") until you have carefully read the following terms and

conditions. By loading or using the Software, you agree to the terms of

this Agreement. If you do not wish to so agree, do not install or use

the Software.

LICENSE. You may copy the Software onto a single computer for your personal, noncommercial use, and you may make one back-up copy of the Software,

subject to these conditions:

1. This Software is licensed for use only in conjunction with Intel

component products. Use of the Software in conjunction with non-Intel

component products is not licensed hereunder.

2. You may not copy, modify, rent, sell, distribute or transfer any part

of the Software except as provided in this Agreement, and you agree to

prevent unauthorized copying of the Software.

3. You may not reverse engineer, decompile, or disassemble the Software.

4. You may not sublicense or permit simultaneous use of the Software by

more than one user.

5. The Software may contain the software or other property of third party

suppliers, some of which may be identified in, and licensed in

accordance with, any enclosed "license.txt" file or other text or file.

OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Software

remains with Intel or its suppliers. The Software is copyrighted and

protected by the laws of the United States and other countries, and

international treaty provisions. You may not remove any copyright notices

from the Software. Intel may make changes to the Software, or to items

referenced therein, at any time without notice, but is not obligated to

support or update the Software. Except as otherwise expressly provided,

Intel grants no express or implied right under Intel patents, copyrights, trademarks, or other intellectual property rights. You may transfer the

Software only if the recipient agrees to be fully bound by these terms and

if you retain no copies of the Software.

LIMITED MEDIA WARRANTY. If the Software has been delivered by Intel on

physical media, Intel warrants the media to be free from material physical

defects for a period of ninety (90) days after delivery by Intel. If such

a defect is found, return the media to Intel for replacement or alternate

delivery of the Software as Intel may select.

EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE, THE SOFTWARE IS

PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED WARRANTY OF ANY KIND

INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, OR FITNESS FOR

A PARTICULAR PURPOSE. Intel does not warrant or assume responsibility for

the accuracy or completeness of any information, text, graphics, links or

other items contained within the Software.

LIMITATION OF LIABILITY. IN NO EVENT WILL INTEL OR ITS SUPPLIERS BE LIABLE

FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, LOST PROFITS,

BUSINESS INTERRUPTION, OR LOST INFORMATION) ARISING OUT OF THE USE OF OR

INABILITY TO USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT EXCLUSION OR

LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES OR CONSEQUENTIAL OR INCIDENTAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE

OTHER LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION.

TERMINATION OF THIS AGREEMENT. Intel may terminate this Agreement at any

time if you violate its terms. Upon termination, you will immediately

destroy the Software or return all copies of the Software to Intel.

APPLICABLE LAWS. Claims arising under this Agreement will be governed by

the laws of Delaware, excluding its principles of conflict of laws and the

United Nations Convention on Contracts for the Sale of Goods. You may not

export the Software in violation of applicable export laws and regulations.

Intel is not obligated under any other agreements unless they are in writing

and signed by an authorized representative of Intel.

GOVERNMENT RESTRICTED RIGHTS. The Software is provided with "RESTRICTED RIGHTS." Use, duplication, or disclosure by the Government is subject to restrictions

as set forth in FAR52.227-14 and DFAR252.227-7013 et seq. or their successors.

Use of the Software by the Government constitutes acknowledgment of Intel's proprietary rights therein. Contractor or Manufacturer is Intel Corporation,

2200 Mission College Blvd., Santa Clara, CA 95052.

I accept the terms in the license agreement

I do not accept the terms in the license agreement